BALLUFF BCS00A1 CAPACITIVE LEVEL SENSOR WITH MEDIA CONTACT/ HEAD FOR AMPLIFIERS/ WITH SPECIAL PROPERTIES
- Model: BCS00A1
Introduction
Need to detect and monitor fill levels in containers, pipes, or tanks while in contact with the media? This is not a problem for Balluff capacitive level sensors with media contact. These detect the fill level of granulated materials, powders, viscous, or liquid media, as well as bulk materials. They are suitable for a wide variety of applications, as they are available in a wide range of versions, including: cylindrical configurations, immersion probes, hole or flange mounting, and in pressure-rated versions are available with a wide variety of plug and cable variants. In addition, their diverse range of housing materials, such as stainless steel, PTFE, and PEEK, ensure the best possible chemical resistance.
Certifications
Features
- Connection: Special connector-Special connector
- Operating temperature: -180 to 250 °C
- IP rating: IP66, IP54 at connector output
- Series: M18
- Measuring range: 1 to 10 mm
- Interface: Special interface
- Easy adjustment and setup, also via IO-Link
- Smart Level technology to compensate for adhesion, foam, and moisture
Sensor : Basic features | |
Approval/Conformity | CE, UKCA, WEEE |
Basic standard | IEC 60947-5-2 |
Sensor : Display/Operation | |
Function Indicator | _ |
Power Indicator | _ |
Sensor : Electrical Connection | |
Cable diameter D | _ |
Cable length L | _ |
Number of conductors | _ |
Sensor : Electrical Data | |
Operating Voltage Ub | _ |
Output Resistance Ra | _ |
Protection Class | _ |
Switching Frequency | 50 Hz |
Sensor : Environmental Conditions | |
EN 60068-2-27, Shock | _ |
EN 60068-2-6, Vibration | _ |
Sensor : Functional Safety | |
MTTF (40 °C) | _ |
Sensor : Interface | |
Switching Output | _ |
Sensor : Material | |
Housing Material | 1.4301 stainless steel |
Material Jacket | _ |
Material Sensing Surface | PTFE |
Sensor : Mechanical Data | |
Dimension | Ø 18 x 65 mm |
Installation | non-flush |
Size | M18x1 |
Sensor : Range/Distance | |
Assured Operating Distance Sa | _ |
Rated Operating Distance Sn | 10 mm |
Real Switching Distance sr | _ |