MOXA MGate 5114 Industrial Ethernet Gateway
MOXA MGate 5114 Industrial Ethernet Gateway
- Model: MGate 5114
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 608705-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.
Certifications
Features
- Modbus RTU/ASCII/TCP/IEC 101 to IEC 104 gateway
- 2 x 10/100Mbps T(x) ports and 1 x RS-232/422/485 port
- 12 to 48 VDC input power
- Metal body
- 0 to 60°C operating temperature
industrial gateway : Ethernet Interface | |
Number of Ports | 2 (1 IP; used for Ethernet cascading) |
Speed | 10/100 Mbps, Auto MDI/MDIX |
Connector | 8-pin RJ45 |
Magnetic Isolation Protection | 1.5 kV (built-in) |
Modbus TCP | Mode: Client/Server, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. Number of Commands: 128, Max. Number of Connections:, MGate as Modbus TCP Client: 32 server connections, MGate as Modbus TCP Server: 32 client connections |
Protocols | Modbus TCP client/server, IEC 60870-5-104 client/server |
industrial gateway : Serial port specifications | |
Protocol | Modbus RTU/ASCII master/slave, IEC60870-5-101 master/slave (Balanced/Unbalanced) |
RS-232 Signals | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
Number of Ports | 1 |
RS-422 Signals | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w Signals | Tx+, Tx-, Rx+, Rx-, GND |
Serial Standards | RS-232/422/485, software selectable |
Connectors | DB9 male |
RS-485-2w Signals | Data+, Data-, GND |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
Terminator for RS-485 | 120 Ω |
Isolation | 2 kV (built-in) |
industrial gateway : Serial Communication Parameters | |
Data Bits | 7, 8 |
Stop Bits | 1, 2 |
Parity | Even, Odd, Space, Mark, None |
Flow Control | RTS/CTS, RTS Toggle (RS-232 only) |
Baudrate | 50 bps to 921.6 kbps |
industrial gateway : General | |
MTBF | 1,140,815 hrs |
industrial gateway : Power Requirements | |
Input Current | 455 mA max. |
Input Voltage | 12 to 48 VDC |
Power Connector | Terminal block |
industrial gateway : Physical Characteristics | |
Dimensions | 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in) |
Housing | Metal, IP30 |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Weight | 507 g (1.12 lb) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Vibration | IEC 60068-2-6, IEC 60068-2-64 |
Shock | IEC 60068-2-27 |
Drop | IEC 60068-2-32 |
Safety | UL 508, EN 60950-1 |
Hazardous Location | Class 1 Division 2, ATEX, IECEx* |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class B |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m, IEC 61000-4-8 PFMF |
Storage Card Slot | 1 microSD (SDHC) card slot supports up to 32 GB |