Menu
Your Cart

MOXA CN2610-8 Terminal Server

Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.


Dual-LAN Redundancy

The CN2600 has two separate LAN ports that can be connected to separate LAN networks. Dual-LAN redundancy involves setting up two separate physical networks to connect the PC host with the CN2600 (the PC host also requires two LAN cards). If one connection fails, the PC host can still communicate with your serial devices over the alternative LAN connection.


Redundant COM

Moxa offers “Redundant COM,” an easy-to-use application to provide an alternative solution for network redundancy. When the CN2600 receives a data packet from a connected device, two identical data packets are sent over two independent LAN connections to prevent lost data packets if one LAN connection becomes unavailable. The CN2600 software is programmed to automatically discard duplicate data packets.


Dual-host Redundancy

The CN2600’s dual-LAN cards can also set up “dual-host” redundancy. In this case, both networks (LAN A and LAN B in the figure) are connected to different hosts. If either of the two hosts shuts down unexpectedly, the other host will still be able to communicate with serial devices connected to the CN2600.


Dual-AC Model Supported

Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even during power circuit failures.


Certifications

    


Features


  • Dual-LAN cards with two independent MAC addresses and IP addresses
  • Redundant COM function available when both LANs are active
  • Dual-host redundancy can be used to add a backup PC to your system
  • 8 x RS-232 Serial Ports with 8-pin RJ45 Connector
  • 1 x 100-240 VAC Power Input
  • Metal Body
  • 0 to 55°C Operating Temperature
Terminal Server : Ethernet Interface
No. of Ports 2 x 10/100BaseT(X) Ports (RJ45 connector)
Terminal Server : Serial Interface
No. of Ports 8
Connector 8-pin RJ45
Serial Standards RS-232
Operation Modes Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Terminal mode, Reverse Telnet mode, PPP mode, DRDAS mode, Redundant COM mode, Disabled
Baudrate 50 bps to 921.6 kbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, RTS/CTS, DTR/DSR, XON/XOFF
Terminal Server : Power Parameters
Input Current 130 mA @ 110 VAC
Input Voltage 100 to 240 VAC, 47 to 63 Hz
Terminal Server : Physical Characteristics
Housing Metal
Installation 19-inch rack mounting
Dimensions 480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications EMC, EMI, EMS, Safety, Vibration, Freefall, RoHS, CRoHS, WEEE
MTBF 831,925 hrs