Menu
Your Cart

MOXA CP-116E-A w/o Cable PCI Express Serial Board

MOXA CP-116E-A w/o Cable PCI Express Serial Board
  • Model: CP-116E-A w/o Cable
$0.00
Ex Tax: $0.00

MOXA CP-116E-A W/O Cable FEATURES

  • 16 x RS-232/422/485 Serial Ports (VHDCI 68 connector)
  • Supports maximum 921.6 kbps baud rate
  • 128-byte FIFO and on-chip H/W, S/W flow control
  • Compatible Driver with Windows, Linux, and UNIX
  • 0 to 55°C Operating Temperature


Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

MOXA CP-116E-A W/O Cable INTRODUCTION

The CP-116E-A is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-116E-A is compatible with all popular operating systems, and each of its 16 serial ports supports data rates of up to 921.6 kbps and provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-116E-A works with PCI Express x1, allowing the board to be installed in any PCI Express slot.

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pulls high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

As an Authorized Distributor of MOXA, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy MOXA CP-116E-A w/o Cable PCI Express Serial Board online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.

You can also find the CP-168EL-A w/o Cable and CP-118E-A w/o Cable models in the MOXA PCIe/UPCI/PCI Serial Cards.

MOXA CP-116E-A W/O Cable CERTIFICATIONS

  
Multiport Serial Boards : Serial Interface
Comm. Controller 16C550C compatible
Number of Ports 16
Bus interface PCI Express 1.0
Serial Standards RS-232, RS-422, RS-485
Connector VHDCI 68
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, RTS/CTS, XON/XOFF
Max. No. of Boards per PC 4
Data Bits 5, 6, 7, 8
FIFO 128 bytes
Isolation No
Multiport Serial Boards : Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Multiport Serial Boards : Serial Software Features
Windows Drivers DOS, Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Drivers Linux kernel 2.4.x, Linux kernel 2.6.x, Linux kernel 3.x, Linux kernel 4.x, Linux kernel 5.x
UNIX Drivers Solaris 10, UnixWare 7, SCO OpenServer 5, SCO OpenServer 6
Multiport Serial Boards : Power Requirements
Input Current 2,733 mA @ 3.3 VDC
Input Voltage -
Multiport Serial Boards : General
MTBF 310,993 hrs
LED Indicators Built-in Tx, Rx LEDs for each port
Multiport Serial Boards : Physical Characteristics
Dimensions 97.9 x 88.9 mm (3.86 x 3.50 in)
Standards and Certifications EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class B; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF; Green Product: RoHS, CRoHS, WEEE; Telcordia (Bellcore) Standard TR/SR
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -20 to 85°C (-4 to 185°F)
Operation Humidity 5 to 95% (non-condensing)