MOXA CP-118E-A-I w/o Cable PCI Express Serial Board






MOXA CP-118E-A-I w/o Cable PCI Express Serial Board
- Model: CP-118E-A-I w/o Cable
$0.00
Ex Tax: $0.00
MOXA CP-118E-A-I W/O Cable FEATURES
- 8 x RS-232/422/485 Serial ports (DB78 female connector)
- 2KV Electrical isolation and 4 KV Surge protection for serial ports
- Supports maximum 921.6 kbps baud rate
- 128-byte FIFO and on-chip H/W, S/W flow control
- Compatible Driver with Windows, Linux, and UNIX
- 0 to 55°C Operating Temperature

Over 40 Years in Business
Successful track record across Canada

Full Engineering Services
A powerhouse to provide consultation, training, and support

Strong Brand Portfolio
Top-notch products from superb global and local suppliers

Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
MOXA CP-118E-A-I W/O Cable INTRODUCTION
The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their eight serial ports supports data rates of up to 921.6 kbps and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot.
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
As an Authorized Distributor of MOXA, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy MOXA CP-118E-A-I w/o Cable PCI Express Serial Board online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.
You can also find the CP-138E-A-I w/o Cable in the MOXA CP-118E-A-I/138E-A-I Series.
MOXA CP-118E-A-I W/O Cable CERTIFICATIONS


Multiport Serial Boards : Serial Interface | |
Comm. Controller | 16C550C compatible |
Number of Ports | 8 |
Bus interface | PCI Express 1.0 |
Serial Standards | RS-232/422/485 |
Connector | DB78 female |
Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, RTS/CTS, XON/XOFF |
Max. No. of Boards per PC | 8 |
Data Bits | 5, 6, 7, 8 |
FIFO | 128 bytes |
Isolation | Yes : 2 KV |
Multiport Serial Boards : Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
Multiport Serial Boards : Serial Software Features | |
Windows Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10/11 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64)/2022, Windows Embedded CE 5.0/6.0, Windows XP Embedded |
Linux Drivers | Linux kernel 5.x, Linux kernel 4.x, Linux kernel 3.x, Linux kernel 2.6.x, Linux kernel 2.4.x |
UNIX Drivers | Solaris 10, UnixWare 7, SCO OpenServer 5, SCO OpenServer 6 |
Multiport Serial Boards : Power Requirements | |
Input Current | 2,356 mA @ 3.3 VDC |
Input Voltage | - |
Multiport Serial Boards : General | |
MTBF | 221,331 hrs |
LED Indicators | Built-in Tx, Rx LEDs for each port |
Multiport Serial Boards : Physical Characteristics | |
Dimensions | 107 x 136.9 mm (4.21 x 5.39 in) |
Standards and Certifications | EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class B; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF; Green Product: RoHS, CRoHS, WEEE; Telcordia (Bellcore) Standard TR/SR |
Operating Temperature | 0 to 55°C (32 to 131°F) |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
Operation Humidity | 5 to 95% (non-condensing) |