MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter
MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter
- Model: CSM-400-1214
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.
Certifications
Features
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) multi-mode port with SC connector
- 12 VDC input power
- -20 to 55°C operating temperature
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- Supports store-and-forward mode and pass-through mode
- Auto-negotiation
- Supports IEEE 802.3AH OAM protocol
- Plug and play
- Hot-swappable
- IP-based remote management
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | Yes : 1 SC Port |
100Mb Fiber optic single mode (Megabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | No |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3u for 100BaseT(X) and 100BaseFX |
eth to fiber : General | |
Maximum cable length for data transfer | 5Km with multi mode fiber optic cable |
MTBF | 1,454,560 hrs |
eth to fiber : Power Requirements | |
Power consumed | 220 mA @ 12 VDC |
Type of power input | - |
Protection against overflow | No |
eth to fiber : LED Indicators | |
LNK/ACT | No |
eth to fiber : Buttons | |
DIP Switch | No |
eth to fiber : Physical Characteristics | |
Standards and Certifications | EMC, EMI, EMS, Safety, Vibration |
Housing | - |
Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
Weight | 0.115kg |
Operating Temperature | -20 to 55°C (-4 to 131°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operation Humidity | 5 to 95% (non-condensing) |
Installation | - |