MOXA ioLogik E2242-T Smart Ethernet Remote I/O
MOXA ioLogik E2242-T Smart Ethernet Remote I/O
- Model: ioLogik E2242-T
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
Certifications
Features
- 4 x AI, 12 x Configurable DIO
- 1 x RS-485 serial ports
- 12 to 36 VDC power input
- -40 to 75°C operating temperature
Remote I/O : Interface | |
Digital Input and Output | No |
Adjustable digital input and output | Yes : 12 adjustable digital inputs and outputs |
Analog Input and Output | Yes : 4 analog inputs |
Relay Output | No |
Thermal sensor input (RTD) | No |
Thermocouple input | No |
LAN | Yes : 1 RJ-45 10/100Mbps port |
Serial port | Yes : 1 RS-485 terminal connector |
Remote I/O : Standards and protocols | |
Protocols | Modbus/RTU, Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP |
Remote I/O : General | |
Compatible Softwares | MX-AOPC UA Server, MXIO |
Remote I/O : Physical Characteristics | |
Standards and Certifications | Safety: UL 508; EMC:EN 61000-6-2/6-4, EMI: CISPR 22, FCC Part 15B Class A; EMS: IEC 61000-4-2; ESD: Contact: 4 kV; Air: 8 kV; IEC 61000-4-3 RS:80 MHz to 1 GHz: 10 V/m1.4 GHz to 2 GHz: 3 V/m2 GHz to 2.7 GHz: 1 V/mIEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kVIEC 61000-4-5 Surge: Power: 1 kVIEC 61000-4-6 CS: 10 VIEC 61000-4-8; Green Product: RoHS, CRoHS, WEEE |
Operating Temperature | -40 to 74 ° C |
Storage Temperature | -40 to 85 ° C |
Operation Humidity | 5% to %95 Non-condensing |