MOXA IMC-21GA Ethernet to Fiber Converter
MOXA IMC-21GA Ethernet to Fiber Converter
- Model: IMC-21GA
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames, allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.
Certifications
Features
- 1 x 10/100/1000Mbps T(x) port and 1 x 100/1000Mbps F(x) SFP port
- 12 to 48 VDC input power
- Metal body
- -10 to 60°C operating temperature
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | No |
10/100/1000Mb RJ45 (Gigabit) Ports | Yes : 1 Port |
100Mb Fiber optic multi mode (Megabit) Ports | No |
100Mb Fiber optic single mode (Megabit) Ports | No |
1000Mb Fiber optic single mode (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | Yes : 1 Port |
M12 port | No |
Alert Output | No |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3az (Energy Efficient Ethernet) |
eth to fiber : General | |
Maximum cable length for data transfer | - |
MTBF | 2,762,058 hour |
eth to fiber : Power Requirements | |
Power consumed | 12V DC, 0.28A to 48V DC |
Type of power input | Terminal |
POE Support | No |
Protection against reverse voltage | Yes |
Protection against overflow | Yes |
eth to fiber : LED Indicators | |
LNK/ACT | No |
Power | Yes |
eth to fiber : Buttons | |
DIP Switch | Fiber speed 100M/1000M, Link Fault Pass-through, Energy Efficient Ethernet |
eth to fiber : Physical Characteristics | |
Standards and Certifications | ,Safety: UL 60950-1, EMC: EN 55032/24, EMI: CISPR 32; FCC Part 15B Class A, EMS: EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 1 V/m, EN 61000-4-4 (EFT): Power: 1 kV; Signal: 1 kV, EN 61000-4-5 (Surge): Power: 1 kV; Signal: 1 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF), EN 61000-4-11 , Green Product: RoHS; CRoHS; WEEE, Shock: IEC 60068-2-27, Freefall: IEC 60068-2-32, Vibration: IEC 60068-2-6, IP30 protection |
Housing | Metal |
Dimensions | 30x125x79mm |
Weight | 0.17Kg |
Operating Temperature | -10 to 60 ° C |
Storage Temperature | -40 to 75 ° C |
Operation Humidity | 5% to %95 non-condensing |
Installation | Din-rail and wall mount |