Menu
Your Cart

MOXA ICF-1180I-S-ST PROFIBUS to Fiber Converter

Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

The ICF-1180I industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1180I provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted.

Certifications

    


Features


  • 1 x PROFIBUS DP port and 1 x 100Mbps F(x) single-mode port with ST connector
  • 12 to 48 VDC input power
  • Metal body
  • 0 to 60°C operating temperature
  • 2kV isolation
converter : Power Requirements
Rated Voltage 12 to 48 VDC
Rated Current 143 mA @ 24 V
Connector Terminal Block
Power Line Protection Level 3 (2 kV) Surge Protection
Overcurrent Protection 1.1 A
converter : PROFIBUS Communication
Data Rate 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, and 12000 kbps
Auto Baudrate Yes
Isolation Protection 2 kV
converter : Interface
P1 Port ST optical fiber
P2 Port PROFIBUS DP (DB9 female)
Relay Alarm One relay output with current carrying capacity of 2 A @ 30 VDC (Normal open)
LED Indicators PWR1, PWR2, Ready, P1 Status, P2 Status
DIP Switches DIP 1 to 4: Baudrate setting, DIP 5: Fiber link monitor, DIP 6: Fiber inverse function, DIP 7: Reserved, DIP 8: Fiber cable test function
converter : Physical Characteristics
Dimensions 30.3 x 115 x 70 mm (1.19 x 4.53 x 2.76 in)
Housing Metal
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 75°C (-40 to 167°F)
Weight 180 g (0.39 lb)
Ambient Relative Humidity 5 to 95% (non-condensing)
Safety UL 508
Hazardous Location UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m, EN 61000-4-4 (EFT): Power: 2 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 2 kV; Signal: 2 kV, EN 61000-R[-35]C4-6 (CS): 150 kHz to 80 MHz: 10 V/m, EN 61000-4-8 (PFM)
Green Product RoHS, CRoHS, WEEE
Freefall IEC 60068-2-32
Technology Standards IEC 61158-2 for PROFIBUS DP
Mounting DIN-Rail mounting, wall mounting (with optional kit)