MOXA ICF-1180I-M-ST PROFIBUS to Fiber Converter
MOXA ICF-1180I-M-ST PROFIBUS to Fiber Converter
- Model: ICF-1180I-M-ST
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The ICF-1180I industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1180I provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted.
Certifications
Features
- 1 x PROFIBUS DP port and 1 x 100Mbps F(x) multi-mode port with ST connector
- 12 to 48 VDC input power
- Metal body
- 0 to 60°C operating temperature
- 2kV isolation
converter : Power Requirements | |
Rated Voltage | 12 to 48 VDC |
Rated Current | 143 mA @ 24 V |
Connector | Terminal Block |
Power Line Protection | Level 3 (2 kV) Surge Protection |
Overcurrent Protection | 1.1 A |
converter : PROFIBUS Communication | |
Data Rate | 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, and 12000 kbps |
Auto Baudrate | Yes |
Isolation Protection | 2 kV |
converter : Interface | |
P1 Port | ST optical fiber |
P2 Port | PROFIBUS DP (DB9 female) |
Relay Alarm | One relay output with current carrying capacity of 2 A @ 30 VDC (Normal open) |
LED Indicators | PWR1, PWR2, Ready, P1 Status, P2 Status |
DIP Switches | DIP 1 to 4: Baudrate setting, DIP 5: Fiber link monitor, DIP 6: Fiber inverse function, DIP 7: Reserved, DIP 8: Fiber cable test function |
converter : Physical Characteristics | |
Dimensions | 30.3 x 115 x 70 mm (1.19 x 4.53 x 2.76 in) |
Housing | Metal |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Storage Temperature | -40 to 75°C (-40 to 167°F) |
Weight | 180 g (0.39 lb) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Safety | UL 508 |
Hazardous Location | UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m, EN 61000-4-4 (EFT): Power: 2 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 2 kV; Signal: 2 kV, EN 61000-R[-35]C4-6 (CS): 150 kHz to 80 MHz: 10 V/m, EN 61000-4-8 (PFM) |
Green Product | RoHS, CRoHS, WEEE |
Freefall | IEC 60068-2-32 |
Technology Standards | IEC 61158-2 for PROFIBUS DP |
Mounting | DIN-Rail mounting, wall mounting (with optional kit) |