MOXA IMC-101-S-SC-80 Ethernet to Fiber Converter
MOXA IMC-101-S-SC-80 Ethernet to Fiber Converter
- Model: IMC-101-S-SC-80
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The IMC-101 industrial media converters provide industrial-grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101 converter’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, IECEx, DNV, and GL Certification), and comply with FCC, UL, and CE standards. Models in the IMC-101 Series support operating temperature from 0 to 60°C, and an extended operating temperature from -40 to 75°C. All IMC-101 converters are subjected to a 100% burn-in test.
Certifications
Features
- 1 x 10/100Mbps T(x) port and and 1 long-haul (80 km) 100Mbps F(x) single-mode port with SC connector
- 12 to 45 VDC input power
- Metal body
- 0 to 60°C operating temperature
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | No |
100Mb Fiber optic single mode (Megabit) Ports | Yes : 1 SC Port |
1000Mb Fiber optic single mode (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | Yes |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3, IEEE 802.3u |
eth to fiber : General | |
Maximum cable length for data transfer | 80Km with single mode fiber optic cable |
MTBF | 401,000 hour |
eth to fiber : Power Requirements | |
Power consumed | 12V DC to 45V DC, 0.3A |
Type of power input | Power Input Jack |
POE Support | No |
Protection against reverse voltage | Yes |
Protection against overflow | Yes |
eth to fiber : LED Indicators | |
LNK/ACT | No |
Power | Yes |
eth to fiber : Buttons | |
DIP Switch | 100BaseFX Full/Half duplex selection, port break alarm mask |
eth to fiber : Physical Characteristics | |
Standards and Certifications | FCC Class A , UL, CE, UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc , : EN 55022/24 , CISPR 22, EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8 (PFMF) , EN 61000-4-11 , RoHS, CRoHS, WEEE , IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, DNV, GL |
Housing | Metal |
Dimensions | 53.6x135x105mm |
Weight | 0.63Kg |
Operating Temperature | 0 to 60 ° C |
Storage Temperature | -40 to 85 ° C |
Operation Humidity | 5% to %95 non-condensing |
Installation | Din-rail and wall mount |