MOXA IMC-21-S-SC Ethernet to Fiber Converter
MOXA IMC-21-S-SC Ethernet to Fiber Converter
- Model: IMC-21-S-SC
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The IMC-21 industrial media converters are entry-level 10/100BaseT(X)-to-100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters are a cost-effective solution that runs on either a 12 or 48 VDC power input and can operate reliably in temperatures ranging from -10 to 60°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 converters are easy to mount on a DIN rail or in distribution boxes.
Certifications
Features
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) single-mode port with SC connector
- 12 to 48 VDC input power
- Plastic body
- -10 to 60°C operating temperature
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | No |
100Mb Fiber optic single mode (Megabit) Ports | Yes : 1 SC Port |
1000Mb Fiber optic single mode (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | Yes |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
eth to fiber : General | |
Maximum cable length for data transfer | 40Km with single mode fiber optic cable |
MTBF | 353,000 hour |
eth to fiber : Power Requirements | |
Power consumed | 12V DC to 48V DC, 0.3A |
Type of power input | Terminal |
POE Support | No |
Protection against reverse voltage | Yes |
Protection against overflow | Yes |
eth to fiber : LED Indicators | |
LNK/ACT | No |
Power | Yes |
eth to fiber : Buttons | |
DIP Switch | TP port’s 10/100M, Half/Full modes, and Force/Auto modes, fiber connection’s Full/Half mode, Link Fault Pass-Through LFP |
eth to fiber : Physical Characteristics | |
Standards and Certifications | IP30 protection, Safety: UL 508, EMC: EN 55022/24, EMI: CISPR 22, FCC Part 15B Class A, EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 1 V/m, EN 61000-4-4 (EFT): Power: 1 kV; Signal: 1 kV, EN 61000-4-5 (Surge): Power: 1 kV; Signal: 1 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF), EN 61000-4-11, RoHS, CRoHS, WEEE, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6 |
Housing | Plastic |
Dimensions | 25x109x97mm |
Weight | 0.12Kg |
Operating Temperature | -10 to 60 ° C |
Storage Temperature | -40 to 70 ° C |
Operation Humidity | 5% to %95 non-condensing |
Installation | Din-rail |