MOXA IMC-21-M-SC Ethernet to Fiber Converter
MOXA IMC-21-M-SC Ethernet to Fiber Converter
- Model: IMC-21-M-SC
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The IMC-21 industrial media converters are entry-level 10/100BaseT(X)-to-100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters are a cost-effective solution that runs on either a 12 or 48 VDC power input and can operate reliably in temperatures ranging from -10 to 60°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 converters are easy to mount on a DIN rail or in distribution boxes.
Certifications
Features
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) multi-mode port with SC connector
- 12 to 48 VDC input power
- Plastic body
- -10 to 60°C operating temperature
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | Yes : 1 SC Port |
100Mb Fiber optic single mode (Megabit) Ports | No |
1000Mb Fiber optic single mode (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | No |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
eth to fiber : General | |
Maximum cable length for data transfer | 5Km with multi mode fiber optic cable |
MTBF | 353,000 hour |
eth to fiber : Power Requirements | |
Power consumed | 12V DC to 48V DC, 0.3A |
Type of power input | Terminal |
POE Support | No |
Protection against reverse voltage | No |
Protection against overflow | Yes |
eth to fiber : LED Indicators | |
LNK/ACT | No |
Power | Yes |
eth to fiber : Buttons | |
DIP Switch | TP port’s 10/100M, Half/Full modes, and Force/Auto modes, fiber connection’s Full/Half mode, Link Fault Pass-Through |
eth to fiber : Physical Characteristics | |
Standards and Certifications | FCC Class A , UL, CE, UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc , : EN 55022/24 , CISPR 22, EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8 (PFMF) , EN 61000-4-11 , RoHS, CRoHS, WEEE , IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, DNV, GL |
Housing | Plastic |
Dimensions | 25x109x97mm |
Weight | 0.125Kg |
Operating Temperature | -10 to 60 ° C |
Storage Temperature | -40 to 75 ° C |
Operation Humidity | 5% to %95 non-condensing |
Installation | Din-rail |