MOXA MGate 5103-T Industrial Ethernet Gateways
MOXA MGate 5103-T Industrial Ethernet Gateways
- Model: MGate 5103-T
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The MGate 5103 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices.
The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML files can be imported into PROFINET PLCs to save time on PLC configuration.
MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly, or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
MGate 5103 supports a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators.
Certifications
Features
- Modbus/EtherNet/IP to PROFINET gateway
- 2 x 10/100Mbps T(x) ports and 1 x RS-232/422/485 port
- 12 to 48 VDC input power
- Metal body
- -40 to 75°C operating temperature
industrial gateway : Ethernet Interface | |
Number of Ports | 2 (1 IP; used for Ethernet cascading) |
Speed | 10/100 Mbps, Auto MDI/MDIX |
Connector | 8-pin RJ45 |
Magnetic Isolation Protection | 1.5 kV (built-in) |
Modbus TCP | Mode: Client/Server, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. Number of Commands: 128, Max. Number of Connections: MGate as Modbus TCP Client: 32, MGate as Modbus TCP Server: 32, Max. Total I/O Data Size: Input: 512 bytes, Output: 512 bytes |
PROFINET | Type: Device/Slave, Max. data size per I/O transmission: Input: 512 bytes, Output: 512 bytes, Max. Number of Connections: MGate as PROFINET IO Device: 1 connection for read/write |
EtherNet/IP | Class: Adapter, CIP Objects Supported: Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port, Max. Number of Connections: MGate as Adapter: 16 connections for read-only, 1 connection for read/write, Max. Total I/O Data Size: Input: 496 bytes, Output: 496 bytes |
Protocols | EtherNet/IP, Modbus TCP, PROFINET RT |
industrial gateway : Serial port specifications | |
Protocol | Modbus RTU/ASCII Master/Slave |
RS-232 Signals | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
Number of Ports | 1 |
RS-422 Signals | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w Signals | Tx+, Tx-, Rx+, Rx-, GND |
Serial Standards | RS-232/422/485, software selectable |
Connectors | DB9 male |
RS-485-2w Signals | Data+, Data-, GND |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
Terminator for RS-485 | 120 Ω |
Isolation | 2 kV (built-in) |
industrial gateway : Serial Communication Parameters | |
Data Bits | 7, 8 |
Stop Bits | 1, 2 |
Parity | Even, Odd, Space, Mark, None |
Flow Control | RTS/CTS, RTS Toggle (RS-232 only) |
Baudrate | 50 bps to 921.6 kbps |
industrial gateway : Software | |
Configuration Options | Web Console, Serial Console |
Utility | MGate Manager for Windows 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2 |
Support | MXconfig, MXview, SNMP (v1, v2, v3), Private MIB |
industrial gateway : General | |
MTBF | 859,422 hrs |
industrial gateway : Power Requirements | |
Input Current | 455 mA @ 12 VDC; 125 mA @ 48 VDC |
Input Voltage | 12 to 48 VDC |
Power Connector | Terminal block |
industrial gateway : Physical Characteristics | |
Dimensions | 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in) |
Housing | Metal, IP30 |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Weight | 507 g (1.12 lb) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Vibration | IEC 60068-2-6, IEC 60068-2-64 |
Shock | IEC 60068-2-27 |
Drop | IEC 60068-2-32 |
Safety | UL 508, EN 60950-1 |
Hazardous Location | Class 1 Division 2, ATEX, IECEx |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class B |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m, IEC 61000-4-8 PFMF |
Storage Card Slot | 1 microSD (SDHC) card slot supports up to 32 GB |