Menu
Your Cart

MOXA MGate 5114-T Industrial Ethernet Gateways

MOXA MGate 5114-T Industrial Ethernet Gateways
  • Model: MGate 5114-T
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 608705-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

Certifications

    


Features


  • Modbus RTU/ASCII/TCP/IEC 101 to IEC 104 gateway
  • 2 x 10/100Mbps T(x) ports and 1 x RS-232/422/485 port
  • 12 to 48 VDC input power
  • Metal body
  • -40 to 75°C operating temperature
industrial gateway : Ethernet Interface
Number of Ports 2 (1 IP; used for Ethernet cascading)
Speed 10/100 Mbps, Auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV (built-in)
Modbus TCP Mode: Client/Server, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. Number of Commands: 128, Max. Number of Connections:, MGate as Modbus TCP Client: 32 server connections, MGate as Modbus TCP Server: 32 client connections
Protocols Modbus TCP client/server, IEC 60870-5-104 client/server
industrial gateway : Serial port specifications
Protocol Modbus RTU/ASCII master/slave, IEC60870-5-101 master/slave (Balanced/Unbalanced)
RS-232 Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Number of Ports 1
RS-422 Signals Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Signals Tx+, Tx-, Rx+, Rx-, GND
Serial Standards RS-232/422/485, software selectable
Connectors DB9 male
RS-485-2w Signals Data+, Data-, GND
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 kΩ, 150 kΩ
Terminator for RS-485 120 Ω
Isolation 2 kV (built-in)
industrial gateway : Serial Communication Parameters
Data Bits 7, 8
Stop Bits 1, 2
Parity Even, Odd, Space, Mark, None
Flow Control RTS/CTS, RTS Toggle (RS-232 only)
Baudrate 50 bps to 921.6 kbps
industrial gateway : General
MTBF 1,140,815 hrs
industrial gateway : Power Requirements
Input Current 455 mA max.
Input Voltage 12 to 48 VDC
Power Connector Terminal block
industrial gateway : Physical Characteristics
Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Housing Metal, IP30
Operating Temperature -40 to 75°C (-40 to 167°F)
Weight 507 g (1.12 lb)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Vibration IEC 60068-2-6, IEC 60068-2-64
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Safety UL 508, EN 60950-1
Hazardous Location Class 1 Division 2, ATEX, IECEx*
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m, IEC 61000-4-8 PFMF
Storage Card Slot 1 microSD (SDHC) card slot supports up to 32 GB