Menu
Your Cart

MOXA MGate 5118-T Industrial Ethernet Gateways

Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on the CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.

The MGate 5118 gateways support the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.

Certifications

        


Features


  • CAN-J1939 to Modbus/PROFINET/EtherNet/IP gateway
  • 2 x 10/100Mbps T(x) ports and 1 x RS-232/422/485 port
  • 12 to 48 VDC input power
  • Metal body
  • -40 to 75°C operating temperature
industrial gateway : Ethernet Interface
Number of Ports 2 (1 IP address, supports Ethernet cascading)
Speed 10/100 Mbps, Auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV (built-in)
Protocols Modbus TCP (Client/Server), PROFINET (I/O device), EtherNet/IP (Scanner/Adapter)
industrial gateway : Serial port specifications
RS-232 Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Signals Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Signals Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Signals Data+, Data-, GND
industrial gateway : Industrial Protocols
Protocols SAE J1939, Modbus RTU/ASCII/TCP, PROFINET, EtherNet/IP
Protocol Conversion J1939 to Modbus RTU/ASCII (Master/Slave), J1939 to Modbus TCP (Client/Server), J1939 to EtherNet/IP (Scanner/Adapter), J1939 to PROFINET (I/O Device)
industrial gateway : CAN-J1939 Serial Interface
Protocols SAE J1939
Number of Ports 1
Connectors 6-pin terminal block
Terminator 120 Ω
Isolation 2 kv (built-in)
Data Rate 250 kbps and 500 kbps
industrial gateway : Serial Communication Parameters
Data Bits 8
Stop Bits 1, 2
Parity Even, Odd, Space, Mark, None
Flow Control RTS/CTS, RTS Toggle
Baudrate 50 bps to 921.6 kbps
industrial gateway : Software
Configuration Options Web console
Utility Device Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2
Support MXview, MXconfig, IEC 62443-4-2
Network Protocols TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), MIB-II, ARP, Telnet
industrial gateway : Modbus Serial Interface
Protocols Modbus RTU/ASCII (Master/Slave)
Number of Ports 1
Serial Standards RS-232/422/485, software selectable
Connectors DB9 male
Pull High/Low Resistor for RS-485 1 kΩ, 150 kΩ
Terminator for RS-485 120 Ω
Isolation 2 kV (built-in)
industrial gateway : General
MTBF 727,873 hrs
industrial gateway : Power Requirements
Input Current 416 mA @ 12 VDC, 195 mA @ 24 VDC; 110 mA @ 48 VDC
Input Voltage 12 to 48 VDC
Power Connector Terminal block
industrial gateway : Physical Characteristics
Dimensions 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Housing Metal, IP30
Operating Temperature -40 to 75°C (-40 to 167°F)
Weight 589 g (1.30 lb)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Vibration IEC 60068-2-6, IEC 60068-2-64
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Safety EN 60950-1(LVD), UL 61010-2-201
Hazardous Location Class I Division 2, ATEX, IECEx
EMC EN 61000-6-2/6-4
EMI CISPR 22, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF: 10 A/m
Storage Card Slot 1 microSD (SDHC) card slot; supports up to 32 GB