MOXA MGate 5217I-600-T Modbus RTU/ASCII/TCP to BACnet/IP Gateway
- Model: MGate 5217I-600-T
The MGate 5217I Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP to BACnet/IP protocol. Depending on the size and the scale of the network, the gateways provide 600-point and 1200-point models. All models are rugged, DIN-rail mountable, operate in wide temperatures and offer built-in 2kV isolation for serial signals.
Easy Configuration Via Web Console and Excel Spreadsheet
The MGate 5217I Series comes with an intuitive UI design to make configuration easy. With that, you can easily access protocol conversion modes and finish the configuration in a few steps instead of installing an additional engineering utility in your computer. Besides, the MGate can generate Modbus commands by importing an Excel spreadsheet, which makes it easy to edit Modbus commands.
Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics
The MGate 5217I gateways support Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as the wrong slave ID and register address, or an incorrect command configuration. With Diagnostics, you can check the communication status and view values at a glance. With Modbus/ BACnet Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
Security Features Based on IEC 62443
Using network devices that are IEC 62443-4-2 compliant and equipped with basic security capabilities is an effective precautionary measure to ward off cyberattacks. The MGate 5217I Series is capable of several basic security capabilities, including password cracking defense, sniffer and data breach prevention, whitelisting, and account management.
Certifications
Features
- 600 Data Points
- Supports Modbus RTU/ASCII/TCP master/client
- Supports BACnet/IP slave/server
- Supports COV for fast data communication
- Supports virtual nodes designed to make each Modbus device a separate BACnet/IP device
- Configures Modbus commands quickly by editing an Excel spreadsheet
- Embedded traffic and diagnostic information for easy troubleshooting
- Built-in Ethernet cascading for easy wiring
- Industrial design with a -40 to 75°C operating temperature range
- Serial port with 2 kV isolation protection
- Dual AC/DC power supply
- Security features based on IEC 62443
industrial gateway : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 2 Ports |
RS-232 Ports | No |
RS-422/485 Ports | No |
RS-232/422/485 Ports | Yes : 2 DB9-M Ports |
Other ports | No |
industrial gateway : Serial port specifications | |
Serial Communication Parameters | Data Bits: 7, 8; Stop Bits: 1, 2; Parity: None, Even, Odd, Space, Mark |
Flow Control | RTS Toggle (RS-232 only), RTS/CTS, DTR/DSR |
Data transfer speed ( Baudrate ) | 50 bps to 921.6 kbps |
RS-485 Flow Control | ADDC® (automatic data direction control) |
Protection against electrostatic discharge | - |
Electrical isolation | Yes : 2 kV (built-in) |
industrial gateway : Standards and protocols | |
Ethernet Protocol | Modbus TCP Client (Master), BACnet/IP Server (Slave) |
Serial Protocol | Modbus RTU/ASCII Master |
industrial gateway : General | |
Management | ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, NTP Client |
Supported software | - |
Compatible operating systems | - |
industrial gateway : Power Requirements | |
Power Consumption (Output Adapter) | 12V DC to 48V DC |
Type of power input | Screw-fastened Euroblock terminal |
industrial gateway : Physical Characteristics | |
Dimensions | 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in) |
Standards and Certifications | EMC, EMI, EMS, Safety, Freefall, Shock, Vibration |
Housing | Plastic |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operation Humidity | 5% to %95 Non-condensing |
Altitude | - |