MOXA ICF-1170I-M-ST CANbus to Fiber Converter
MOXA ICF-1170I-M-ST CANbus to Fiber Converter
- Model: ICF-1170I-M-ST
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with an alarm contact relay to ensure that your CAN bus system will remain online. Fiber Test Mode Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.
Certifications
Features
- 1 x CAN port and 1 x 100Mbps F(x) multi-mode port with ST connector
- 12 to 48 VDC input power
- Metal body
- 0 to 60°C operating temperature
- 2kV isolation
converter : CAN Communication | |
CAN Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND) |
Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
Connector Type | 3-pin removable screw terminal x1 |
Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
Transfer Rate | Up to 1 Mbps |
System Delay | 150 ns |
Isolation Protection | 2 kV |
Transmission Distance | Max 2 km (depends on the data rate and the protocol used) |
LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
converter : Fiber Communication | |
Connector Type | ST (multi-mode) fiber ports |
converter : Power Requirements | |
Input Voltage | 12 to 48 VDC dual power for redundant power |
Input Current | ICF-1170I: 221 mA @ 12 VDC, Alarm Contact: 1 relay output with current-carrying capacity of 1 A @ 24 VDC |
Voltage Reversal Protection | Protects against V+/V- reversal |
Overcurrent Protection | 1.1 A (protects against two signals shorted together) |
converter : General | |
MTBF | 792,085 hrs |
converter : Physical Characteristics | |
Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
Housing | Metal |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Weight | 178 g (0.39 lb) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Safety | UL 508 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 2 kV; Signal: 1 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF) |
Green Product | RoHS, CRoHS, WEEE |
Freefall | IEC 60068-2-32 |