MOXA ICF-1150I-S-ST-T Serial to Fiber Converter

Tags: Serial Converters , Serial-to-Fiber Converters

Model: ICF-1150I-S-ST-T

Based on 0 reviews. - Write a review

$0.00

Ex Tax: $0.00

Add to Cart

Buy Now Enquire Now

Add to Wish List Compare this Product

Datasheet

Over 40 Years in Business

Successful track record across Canada

Full Engineering Services

A powerhouse to provide consultation, training, and support

Strong Brand Portfolio

Top-notch products from superb global and local suppliers

Advanced Technologies

From legacy and mainstream to advanced Industry 4.0

Description
Specifications

Introduction

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

Certifications

Features

1 x RS-232/422/485 Serial port and 1 x 100Mbps F(x) single-mode port with ST connector
12 to 48 VDC input power
Metal body
-40 to 85°C operating temperature
2 kV isolation

converter : Converter specifications
Data transfer speed	0.05Kbps to 921.6Kbps
Maximum data transmission distance	40Km
Minimum output power converter	-5dBm
Sensitivity to receiving information	-25dBm
Wavelength	1310nm
converter : Power Requirements
Maximum power consumption	-
Power Consumption (Output Adapter)	12V DC, 0.163A to 48V DC
Power Input Plugin ( Redundant )	No
converter : Standards and protocols
Point-to-point topology	Half-duplex or full-duplex
Ring topology	Half-duplex
RS-232 Signals	TxD, RxD, GND
RS-422 Signals	TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals	Data+, Data-, GND
converter : Interface
10/100Mb RJ45 (Megabit) Ports	No
100Mb Fiber optic single mode (Megabit) Ports	Yes : 1 ST Port
10/100/1000Mb (Gigabit) POE Ports	No
100Mb Fiber optic multi mode (Megabit) Ports	No
10/100/1000Mb RJ45 (Gigabit) Ports	No
1000Mb SFP Fiber optic (Gigabit) Ports	No
100Mb SFP Fiber optic (Megabit) Ports	No
Number of 10/100Mb PoE port	No
USB	No
DSL	No
Serial port	Yes : 2 RS-232/422/485 Ports
Other ports	No
converter : General
Fan / Fanless	No
MTBF	792,085 hour
Require cable diameter	G.652
converter : Physical Characteristics
Dimensions	30.3x70x115mm
Housing	Metal
Installation	Din-rail
Isolation	Yes : 2KV
Operating Temperature	-40 to 85 ° C
Operation Humidity	-
Operation Humidity	5% to %95 non-condensing
Protection against excessive consumption	Yes : 1.1A
Protection against reverse flow	Yes
Standards and Certifications	Safety: UL 508; Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx; EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class B; EMS: EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 4 kV; Signal: 0.5 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF); Green Product: RoHS, CRoHS, WEEE; Freefall: IEC 60068-2-32; Standard: Telcordia (Bellcore), GB; Water and Dust Proof: IP30
Storage Temperature	-40 to 85 ° C
Weight	0.33Kg
converter : LED Indicators
LED Per Port	No
Power	Yes
converter : Package Checklist
Hardware installation guide	Yes
Power adapter	No
Power cable	No

Company

Resources

MOXA ICF-1150I-S-ST-T Serial to Fiber Converter

Custom Links

My Account

Customer Service