MOXA VPort P26A-1MP-T Dome IP Camera
MOXA VPort P26A-1MP-T Dome IP Camera
- Model: VPort P26A-1MP-T
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
The VPort 26A-1MP is a vandal-proof, IP66-rated, fixed dome HD IP
camera for harsh outdoor environments. With a maximum
resolution of 1280 x 800, H.264/ MJPEG triple video streams, and a day-and-night camera lens, the VPort 26A-1MP is especially well-suited for
outdoor video surveillance applications.
Certifications
Features
- 1/2.7” progressive scan camera with maximum 1280 x 800 resolution at up to 30 fps
- DNR and WDR for superb image quality
- Triple video streams with H.264 and MJPEG
- 3 to 9 mm day-and-night varifocal lens with a built-in ICR (removable IR-cut filter ICR)
- DynaStream™ for optimized network efficiency
- CBR Pro™ for high image quality in limited bandwidth transmissions
- ONVIF support for standardization and interoperability
- 3-9 mm Lens
- 1 x line-in and 1 x lineout Audio Interface
- SD slot, SDHC interface Local Storage
- PoE (802.3af) Power supply
- -40 to 75°C operating temperature
IP Cameras : Camera | |
Sensor | 1/2.7” HD progressive scan CMOS |
Lens | 3X (controlled manually), f=3 mm (wide) to 9 mm (tele), F1.2 to F2.3, Horizontal angle of view: 112° to 35°, Vertical angle of view: 58° to 20°, Diagonal: 115° to 40° |
Camera Angle | Pan: ±175°, Tilt: 0 to 85°, Rotation: Pan: ±180° |
ICR Control (for day & night) | Auto (light sensor control) or DI control |
Synchronization | Internal |
White Balance | ATW/AWB |
DNR | Built-in DNR (digital noise reduction) |
WDR | Levels 1-8• color: 100 dB, B/W: 110 dB |
Auto Exposure | Level ±5 |
Image Rotation | Flip, Mirror, and 180° rotation |
Image Setting | Manual tuning with saturation, sharpness, and contrast |
Black Level Control | High, Medium, Low |
AGC (auto gain control) | 2X, 4X, 8X, 16X, 32X, 64X |
Minimum Illumination | Color: 0.2 lux at F1.2, B/W: 0.05 lux at F1.2 |
Day & Night | Auto/Color/BW; ICR control |
Electronic Shutter | Fixed (1/30 to 1/25000 sec) |
S/N Ratio | 50 dB (AGC OFF, DNR ON) |
IRIS | Auto, DC drive |
IP Cameras : Audio | |
Audio Inputs | 1 line-in with 2-pin terminal block connector |
Audio Format | Mono, PCM (G.711) |
Audio Outputs | 1 line-out with 2-pin terminal block connector |
IP Cameras : Video | |
Video Compression | H.264 (ISO/IEC 14496-10) or MJPEG |
Video Output | via Ethernet |
Video Streams | 3, H.264, or MJPEG independent video streams |
Video Viewing | DynaStream™ support for changing the video frame rate automatically, 3 privacy mask areas provided, Adjustable image size and quality, Timestamp and text overlay, Maximum of 5 simultaneous unicast connections, 50 multicast clients, RO |
IP Cameras : Network | |
Protocols | TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS |
Ethernet | 1 10/100BaseT(X) Ethernet port, RJ45 connector |
IP Cameras : GPIO | |
Digital Inputs | 1, max. 8 mA• High: +13 V to +30 V, Low: -30 V to +3 V |
Relay Outputs | 1, max. 24 VDC @ 1 A |
IP Cameras : Power Requirements | |
Input Voltage | VPort 26A-1MP: 12 to 24 VDC or 24 VAC, VPort P26A-1MP: PoE, IEEE 802.3af |
Input Current | VPort 26A-1MP: 12 to 24 VDC, 500 mA or 24 VAC, 5.5 W ,VPort P26A-1MP: 48 VDC, 180 mA |
Power Consumption | VPort 26A-1MP: 5.5 W, VPort P26A-1MP: 5.8 W |
IP Cameras : Alarms | |
Intelligent Video | Tamper alarm |
Video Motion Detection | Includes sensitivity settings |
Scheduling | Daily repeat timing schedule |
Imaging | JPEG snapshots for pre/trigger/post alarm images |
Custom Alarms | HTTP event servers and CGI events for setting customized alarm actions |
Email/FTP Messaging | Automatic transfer of stored images via email or FTP as event-triggered actions |
Pre-alarm Buffer | 24 MB video buffer for JPEG snapshot images |
IP Cameras : Security | |
Password | User level password protection |
Filtering | By IP address |
Encryption | HTTPS, SSH |
Authentication | 802.1X |
IP Cameras : Standards and Certifications | |
EMI | CISPR 22, FCC Part 15B Class A |
Shock | IEC 60068-2-27, 20g/11ms |
Vibration | IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g; 1.50 hrs/axis, IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86 hrs/axis |
Vandal Resistance | EN 62262, IK10 |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 |
IP Cameras : General | |
MTBF | 201,721 hrs |
IP Cameras : Physical Characteristics | |
Housing | Metal, IP66 rated for rain and dust protection |
Dimensions | Diameter: 149 mm (5.86 in), Height: 120 mm (4.72 in) |
Weight | 1.39 kg (3.06 lb) |
Installation | Surface mounting (standard), outdoor mounting with optional accessories |
Operating Temperature | -40 to 50°C (-40 to 122°F ) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Safety | UL 60950-1 |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Altitude | Up to 2000 m |
IP Cameras : Minimum Viewing System Requirements | |
CPU | Pentium 4, 2.4 GHz |
Memory | 512 MB of memory |
Browser | Internet Explorer 9.x or above |
Multimedia | DirectX 9.0c or above |
IP Cameras : Software Development | |
VPort SDK PLUS | Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third third-party developers (the latest version of the SDK is available for download from Moxa’s website). |
Standard | ONVIF Profile S |