Menu
Your Cart

MOXA VPort P26A-1MP-T Dome IP Camera

Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

The VPort 26A-1MP is a vandal-proof, IP66-rated, fixed dome HD IP camera for harsh outdoor environments. With a maximum resolution of 1280 x 800, H.264/ MJPEG triple video streams, and a day-and-night camera lens, the VPort 26A-1MP is especially well-suited for outdoor video surveillance applications.

Certifications

      


Features


  • 1/2.7” progressive scan camera with maximum 1280 x 800 resolution at up to 30 fps
  • DNR and WDR for superb image quality
  • Triple video streams with H.264 and MJPEG
  • 3 to 9 mm day-and-night varifocal lens with a built-in ICR (removable IR-cut filter ICR)
  • DynaStream™ for optimized network efficiency
  • CBR Pro™ for high image quality in limited bandwidth transmissions
  • ONVIF support for standardization and interoperability
  • 3-9 mm Lens
  • 1 x line-in and 1 x lineout Audio Interface
  • SD slot, SDHC interface Local Storage
  • PoE (802.3af) Power supply
  • -40 to 75°C operating temperature
IP Cameras : Camera
Sensor 1/2.7” HD progressive scan CMOS
Lens 3X (controlled manually), f=3 mm (wide) to 9 mm (tele), F1.2 to F2.3, Horizontal angle of view: 112° to 35°, Vertical angle of view: 58° to 20°, Diagonal: 115° to 40°
Camera Angle Pan: ±175°, Tilt: 0 to 85°, Rotation: Pan: ±180°
ICR Control (for day & night) Auto (light sensor control) or DI control
Synchronization Internal
White Balance ATW/AWB
DNR Built-in DNR (digital noise reduction)
WDR Levels 1-8• color: 100 dB, B/W: 110 dB
Auto Exposure Level ±5
Image Rotation Flip, Mirror, and 180° rotation
Image Setting Manual tuning with saturation, sharpness, and contrast
Black Level Control High, Medium, Low
AGC (auto gain control) 2X, 4X, 8X, 16X, 32X, 64X
Minimum Illumination Color: 0.2 lux at F1.2, B/W: 0.05 lux at F1.2
Day & Night Auto/Color/BW; ICR control
Electronic Shutter Fixed (1/30 to 1/25000 sec)
S/N Ratio 50 dB (AGC OFF, DNR ON)
IRIS Auto, DC drive
IP Cameras : Audio
Audio Inputs 1 line-in with 2-pin terminal block connector
Audio Format Mono, PCM (G.711)
Audio Outputs 1 line-out with 2-pin terminal block connector
IP Cameras : Video
Video Compression H.264 (ISO/IEC 14496-10) or MJPEG
Video Output via Ethernet
Video Streams 3, H.264, or MJPEG independent video streams
Video Viewing DynaStream™ support for changing the video frame rate automatically, 3 privacy mask areas provided, Adjustable image size and quality, Timestamp and text overlay, Maximum of 5 simultaneous unicast connections, 50 multicast clients, RO
IP Cameras : Network
Protocols TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS
Ethernet 1 10/100BaseT(X) Ethernet port, RJ45 connector
IP Cameras : GPIO
Digital Inputs 1, max. 8 mA• High: +13 V to +30 V, Low: -30 V to +3 V
Relay Outputs 1, max. 24 VDC @ 1 A
IP Cameras : Power Requirements
Input Voltage VPort 26A-1MP: 12 to 24 VDC or 24 VAC, VPort P26A-1MP: PoE, IEEE 802.3af
Input Current VPort 26A-1MP: 12 to 24 VDC, 500 mA or 24 VAC, 5.5 W ,VPort P26A-1MP: 48 VDC, 180 mA
Power Consumption VPort 26A-1MP: 5.5 W, VPort P26A-1MP: 5.8 W
IP Cameras : Alarms
Intelligent Video Tamper alarm
Video Motion Detection Includes sensitivity settings
Scheduling Daily repeat timing schedule
Imaging JPEG snapshots for pre/trigger/post alarm images
Custom Alarms HTTP event servers and CGI events for setting customized alarm actions
Email/FTP Messaging Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm Buffer 24 MB video buffer for JPEG snapshot images
IP Cameras : Security
Password User level password protection
Filtering By IP address
Encryption HTTPS, SSH
Authentication 802.1X
IP Cameras : Standards and Certifications
EMI CISPR 22, FCC Part 15B Class A
Shock IEC 60068-2-27, 20g/11ms
Vibration IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g; 1.50 hrs/axis, IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86 hrs/axis
Vandal Resistance EN 62262, IK10
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8
IP Cameras : General
MTBF 201,721 hrs
IP Cameras : Physical Characteristics
Housing Metal, IP66 rated for rain and dust protection
Dimensions Diameter: 149 mm (5.86 in), Height: 120 mm (4.72 in)
Weight 1.39 kg (3.06 lb)
Installation Surface mounting (standard), outdoor mounting with optional accessories
Operating Temperature -40 to 50°C (-40 to 122°F )
Ambient Relative Humidity 5 to 95% (non-condensing)
Safety UL 60950-1
Storage Temperature -40 to 85°C (-40 to 185°F)
Altitude Up to 2000 m
IP Cameras : Minimum Viewing System Requirements
CPU Pentium 4, 2.4 GHz
Memory 512 MB of memory
Browser Internet Explorer 9.x or above
Multimedia DirectX 9.0c or above
IP Cameras : Software Development
VPort SDK PLUS Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third third-party developers (the latest version of the SDK is available for download from Moxa’s website).
Standard ONVIF Profile S