Menu
Your Cart
0

Proxim Edge Multipoint MP-1025-CPE-WD Point-to-multiPoint Radio

Proxim Edge Multipoint MP-1025-CPE-WD Point-to-multiPoint Radio
Tags: Point-to-Multipoint Radios
Proxim Edge Multipoint MP-1025-CPE-WD Point-to-multiPoint Radio
  • Model: Edge Multipoint MP-1025-CPE-WD
Proxim Proxim
Based on 0 reviews. - Write a review
$0.00
Ex Tax: $0.00
Add to Cart
Buy Now Enquire Now
Add to Wish List Compare this Product
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Introduction

Proxim’s Edge Multipoint 1025 Series products are high-performance point-to-multipoint radios designed to deliver years of reliable service and priced to fit cost-sensitive projects. The Edge Multipoint 1025 series features one 5 GHz radio delivering up to 400 Mbps data rate. Utilizing Proxim’s highly efficient Wireless Outdoor Router Protocol (WORP), the Edge Multipoint provides a feature set that enables the effective use of bandwidth and offers granular service level management through an advanced Quality of Service engine.


Certifications



Features

  • High throughput with radio rates of 400 Mbps in MIMO 2x2:2 mode at 40 MHz
  • High-power radio delivering up to 27 dBm (4 RF) at 5 GHz.
  • High reliability and advanced QoS for quad-play applications.
  • Dual IPv4 and IPv6 stacks
  • AES 128 encryption and Radius based authentication

  • Customer Premises Equipment

Point-to-Multipoint Radio : Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Point-to-Multipoint Radio : Antenna
Antenna Type Integrated 2x2 MIMO 15 dBi Dual Polarized 30-degree Panel Antenna plus Four RP-SMA Connectors (Software switch between integrated antenna and connectors)
Point-to-Multipoint Radio : Radio Specifications
TX Power Up to 24 dBm (dual chain) or 27 dBm (quad chain)
MIMO 2x2:2 (license upgrade to 4x4:4)
Modulation OFDM BPSK-QAM256
Frequency 5.150 – 5.925 GHz (Subject to Country Regulations)
Channel Size 20 and 40 MHz (license upgrade to 80 MHz)
Data Rate Up to 400 Mbps
Throughput Up to 400 Mbps
TX Power Control 0 - 17 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support
Point-to-Multipoint Radio : Management
Remote Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Point-to-Multipoint Radio : Standards and Protocols
Synchronization -
Point-to-Multipoint Radio : Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Point-to-Multipoint Radio : Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE endpoint with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Point-to-Multipoint Radio : Power requirements
Power Consumption 10 W in MIMO 2x2 mode, 16 W in MIMO 4x4 mode
Power Supply 802.3af/at compliant (MIMO 4x4 mode requires 802.3at)
Point-to-Multipoint Radio : Physical characteristics
Safety UL/IEC/EN 62386-1 and 60950-22
Temperature OPERATING -30º to 55º Celsius (-22º to 131º Fahrenheit), STORAGE -50º to 70º Celsius (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in)
Dimensions Unpackaged 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in)
Weight (PACKAGED) 2.85 kg (6.28 lbs)
Weight (UNPACKAGED) 1.24 kg (2.73 lbs)
Standards and Certifications UL/IEC/EN 62386-1 and 60950-22
Wind Loading 180 km/h (112.5 mph)
Point-to-Multipoint Radio : Package Checklist
Package Contents One Edge MP-1025-BS3/CPE with integrated antenna plus four RP-SMA connectors, Five SMA weatherproofing caps, One M25 weatherproofing cable gland, One power injector, and country-specific power cord, One full axis mounting kit, One Grounding kit, One Quick Installation Guide
Point-to-Multipoint Radio : General
MTBF 250 000 hours
Quickview
Proxim Edge Multipoint MP-1025-BS3-WD Point-to-multiPoint Radio Proxim Edge Multipoint MP-1025-BS3-WD Point-to-multiPoint Radio
Brand: Proxim
Proxim Edge Multipoint MP-1025-BS3-WD Point-to-multiPoint Radio
IntroductionProxim’s Edge Multipoint 1025 Series products are high-performance point-to-multipoint radios designed to deliver years of reliable serv..
$0.00
Ex Tax:$0.00
Add to Cart
Add to Wish List Compare this Product
Quickview
Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio
Brand: Proxim
Proxim Edge Multipoint MP-1025-BSU-32SU-UPG Point-to-multiPoint Radio
IntroductionProxim’s Edge Multipoint 1025 Series products are high-performance point-to-multipoint radios designed to deliver years of reliable servic..
$0.00
Ex Tax:$0.00
Add to Cart
Add to Wish List Compare this Product