Menu
Your Cart

Proxim Tsunami QB-826-LNK-100 Point-to-Point Radio

Proxim Tsunami QB-826-LNK-100 Point-to-Point Radio
  • Model: Tsunami QB-826-LNK-100
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Introduction

Tsunami Quickbridge® 826 series is an incredibly cost-effective, non-Line-of-Sight Point-to-Point (PtP) wireless backhaul solution. With this complete “Hop-in-a-Box” solution delivering up to 100 Mbps throughput, deployments of all sizes will enjoy a quick return on investment.

With excellent spectrum efficiency and a highly evolved prioritization platform tailored to deliver voice, video, and data applications, Tsunami Quickbridge® 826 series satisfies carriers, wireless service providers, and Government organizations with requirements for reliable cost-optimized high-performance wireless backhaul operating in the 5.900 – 6.425 GHz band.


Certifications

  


Features

  • One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
  • 2x2 MIMO
  • Integrated 15 dBi dual Polarized (H+V) panel antenna
  • IP67
Point-to-point Radio : Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Point-to-point Radio : Radio Specifications
MIMO 2x2 MIMO
Modulation OFDM with BPSK, QPSK, QAM16, QAM64
Frequency 5.900 – 6.425 GHz (Subject to Country Regulations)
Channel Size 40 MHz, 20 MHz, 10 MHz, 5 MHz channel bandwidths
Data Rate MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection
TX Power Up to 25 dBm (dual chain)
TX Power Control 0 – 20 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support
Point-to-point Radio : Antenna
Antenna Type Integrated 15 dBi dual Polarized (H+V) panel antenna
Point-to-point Radio : Management
Remote Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Point-to-point Radio : Security
Encryption AES-CCM 128 bits
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Point-to-point Radio : Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Throughput Capacity Up to 100 Mbps
Gateway Features DHCP Server & relay, NAT with Std ALGs
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Point-to-point Radio : Power Requirement
Power Consumption 6 Watt typical (15 Watt max)
Point-to-point Radio : Physical Characteristics
Temperature OPERATING TEMPERATURE -40º to 55ºC (-40º to 131º Fahrenheit), STORAGE TEMPERATURE -55º to 70ºC (-67º to 158º Fahrenheit)
Humidity Max 100% relative humidity (non-condensing)
IP Rating IP67
Dimensions Packaged 13.97 x8.86 x 6.92 in (355 x 225 x 176 mm)
Dimensions Unpackaged 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm) – Each End Point
Weight (PACKAGED) 9.8 lbs (4.45 Kg)
Weight (UNPACKAGED) 2.1 lbs (0.950 kg) – Each end point
Safety UL 60950-1/22
Wind Loading 180 km/h (112 mph)
Point-to-point Radio : General
MTBF 200,000 hours
Point-to-point Radio : Package Checklist
Package Contents One Tsunami® QB-826-LNK-100 with integrated antenna (Two Tsunami® QB-826-EPR-100 ), Two 20 W power injector and country specific power cord, Two basic Pole mounting kit, Two Connector weatherproofing kit (Includes all recommended weatherproofing material), Two Grounding kit, Two Quick Installation Guide