PULS CP5.241 DIN-rail Power supply
Introduction
The Dimension CP-Series are cost-optimized power supplies without compromising quality, reliability, and performance. The CP-Series is part of the DIMENSION power supply family.
The CP5.241 power supplies come with three connection terminal options: screw, spring-clamp, or push-in terminals, which are optimized for automated wiring.
The CP5.241-C1 is equipped with conformal coated PC boards preferred for use in harsh environments and the CP4.242 features an enhanced DC input voltage range.
The most outstanding features of these units are their small size, high efficiency, electronic inrush current limitation, active PFC, and the wide operating temperature range. The devices have a power reserve of 20% included, which may even be used continuously at temperatures up to +45°C. Additionally, they can deliver 3 times the nominal output current for 12ms which helps to trip fuses on faulty output branches. High immunity to transients and power surges as well as low electromagnetic emission, a DC-OK signal contact for remote monitoring, and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.
Certifications
Features
- AC 100-240V Wide-range Input
- Width only 32mm
- Efficiency up to 94.3%
- Excellent Partial Load Efficiency
- 20% Output Power Reserves
- Easy Fuse Breaking – 3 times nominal current for 12ms
- Safe HiccupPLUS Overload Mode
- Active Power Factor Correction (PFC)
- Minimal Inrush Current Surge
- Full Power Between -25°C and +60°C
- DC-OK Relay Contact
