PULS CP10.241-M1 DIN-rail Power Supply
Introduction
The CP10.241-M1 is a DIN-rail mountable single-phase input power supply for industrial use and for use in medical equipment. It provides a stabilized and galvanically separated SELV/PELV output voltage.
The specialty of this power supply is the 2MOPP (two means of patient protection) safety approval for medical use and the fulfillment of the required EMC tests for professional healthcare facilities and home healthcare environments.
The CP-Series is part of the DIMENSION power supply family. The most outstanding features of CP10.241-M1 are the high efficiency, advanced inrush current limitation, active PFC, and wide operational temperature range. High immunity to transients and power surges as well as low electromagnetic emission, a DC-OK relay contact, and a large international approval package for a variety of applications make this unit suitable for nearly every situation.
Certifications
Features
- 2MOPP Safety Approved for Medical Applications According to IEC 60601-1, 3rd edition
- EMC Tested for Medical Use According to IEC 60601-1-2, 4th edition
- Quick-connect Spring-clamp Terminals
- AC 100-240V Wide-range Input
- Width only 39mm
- Efficiency up to 95.2%, Excellent Partial Load Efficiency
- 20% Output Power Reserves
- Safe HiccupPLUS Overload Mode
- Easy Fuse Breaking due to High Overload Peak Current
- Active Power Factor Correction (PFC)
- Minimal Inrush Current Surge
- Full Power Between -25°C and +60°C
