PULS CP20.242-R2 Power supply
Introduction
The Dimension CP-Series are cost-optimized power supplies without compromising quality, reliability, and performance. The most outstanding features of the CP20 series are the high efficiency, electronic inrush current limitation, active PFC, wide operating temperature range, and extraordinarily small size.
The CP20.241-C1 is equipped with conformal-coated PC boards preferred for applications in harsh areas. The CP20.241-S1 is equipped with quick-connect spring clamp terminals preferred for applications that are exposed to mechanical vibration. The CP20.241-S2 has push-in terminals optimized for easy cabinet wiring.
The CP20.241-V1 is equipped with a remote ON/OFF feature and the CP20.242 features an enhanced DC input voltage range. The devices have a power reserve of 20% included, which may even be used continuously up to +45°C. High immunity to transients and power surges as well as low electromagnetic emission, a DC-OK relay contact, and a large international approval package make this unit suitable for nearly every situation.
Certifications
Features
- DC 110-300V Wide-range Input
- Width only 48mm
- Efficiency up to 95.6%
- Excellent Partial Load Efficiency
- 20% Output Power Reserves
- Easy Fuse Breaking – 3 times nominal current for 12ms
- Safe Hiccup PLUS Overload Mode
- Active Power Factor Correction (PFC)
- Minimal Inrush Current Surge
- Full Power Between -25°C and +60°C
- DC-OK Relay Contact
- Current Sharing Feature for Parallel Use
