Proxim ORiNOCO USB-9100 Wireless LAN Access Point
- Model: ORiNOCO USB-9100
Proxim ORiNOCO USB-9100 FEATURES
- 802.11ac MIMO 2x2 solution for 5 GHz band
- Complete 802.11a/b/g/n compatibility for 2.4 GHz and 5 GHz band
- USB 3.0 interface for optimum communication with the host computer
- IEEE 802.11e EDCA QoS Enhancement
- IEEE 802.11h Spectrum and Transmit Power Management Extensions




Proxim ORiNOCO USB-9100 INTRODUCTION
The ORiNOCO USB-9100 products leverage Proxim’s extensive
experience in both WLAN access points and wireless backhaul. The ORiNOCO USB-9100 products combine an ORiNOCO 2.4 GHz access point and a Tsunami
Quickbridge® 5 GHz point-to-point backhaul radio into a single product. By
using these products, end-users will be able to enjoy network and Internet
access via the feature-rich ORiNOCO access point combined with a very high
throughput (866 Mbps data rate) backhaul in a single unit. This combination of
functionality in a single unit is designed to reduce the solution footprint
(especially for city deployments where smaller is better), reduce initial
capital expenditure costs, and reduce recurring site rental costs.
USB-9100 products can all be centrally managed with
ProximVision™ Advanced, Proxim’s hybrid controller-network management solution.
ProximVision Advanced gives network administrators tremendous flexibility and
control of individual units in heterogeneous network environments, enabling
rapid deployments by automating configuration processes, exhaustive
software-based device configuration capabilities, and easy upgradability.
As an Authorized Distributor of Proxim, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy Proxim ORiNOCO USB-9100 Wireless LAN Access Point online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.
Wireless Radio : Interfaces | |
Ethernet | - |
Wired Ethernet | - |
Wireless Protocol | 802.11 a/b/g/n/ac |
Extension | - |
Management | - |
Wireless Radio : Radio Specifications | |
Radio Type | Access Point USB 3.0 |
MIMO | 2x2 |
Modulation | OFDM, BPSK, QPSK, QAM16, QAM64, QAM 256 |
Frequency | 2.400 – 2.484, 5.150 – 5.350, 5.470 - 5.825 GHz |
Channel Size | - |
Data Rate | Up to 866 Mbps |
TX Power | Up to 17 dBm (single Tx chain), Up to 18 dBm (two Tx chains) |
TX Power Control | - |
Throughput | Up to 330 Mbps (11ac 80 MHz) |
Other | - |
Wireless Radio : Antenna | |
Antenna Type | Two internally printed 3.9 dBi antennas |
Beam Width | - |
Receive Gain | - |
Transmit Gain | - |
Wireless Radio : Network | |
Modes | - |
IP Stack | - |
Latency | - |
Gateway Features | - |
VLAN | - |
Wireless Radio : Management | |
Remote | - |
SNMP | - |
Bluetooth Low Energy | - |
Multi-Language Support | - |
Other | - |
Wireless Radio : Security | |
Encryption | Enterprise/802.1x, Personal/ PSK (Pre-Shared Key) or Open |
Authentication | 802.11i Wireless Security with AES-128, TKIP or WEP |
802.1X Support | PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-TTLS, EAP-AKA |
Wireless Radio : Wireless | |
AP-AP Communications | - |
RF Environment | - |
Other | - |
Wireless Radio : General | |
MTBF | - |
Wireless Radio : Power Requirement | |
Input Power | - |
Output Power | - |
Power Consumption | Standby: 173 mA / 5 VDC, Operating: 426 mA / 5 VDC |
Power Standards | - |
Wireless Radio : Physical Characteristics | |
Temperature | Storage: -30 to +70 °C, OPERATING: 0 to +40 °C |
Humidity | 20 to 95 % non-condensing |
IP Rating | - |
Dimensions Packaged | 114 x 94 x 25 mm |
Dimensions Unpackaged | 80 x 26 x 11 mm |
Weight (PACKAGED) | 50 g |
Weight (UNPACKAGED) | 15 g |
Standards and Certifications | - |
Safety | - |
Wind Loading | - |
Wireless Radio : Standards and Protocols | |
Synchronization | - |
Wireless Radio : Package Checklist | |
Package Contents | USB 9100 802.11a/b/g/n/ac adapter with cap, Quick Installation Guide |