Menu
Your Cart

Proxim Tsunami MP-10100-CPA-50-US Point-to-multiPoint Radio

Proxim Tsunami MP-10100-CPA-50-US Point-to-multiPoint Radio
  • Model: Tsunami MP-10100-CPA-50-US
$0.00
Ex Tax: $0.00

Proxim Tsunami MP-10100-CPA-50-US FEATURES

  • Allows flexible bandwidth allocation for service tiers
  • Field upgradable 50, 100, 150, or 200 Mbps of throughput (license upgradeable)
  • Supports flexible channel planning for 4.900 to 5.925 GHz
  • Advanced encryption protects over-the-air transmission via AES-128
  • Uses Proxim’s Wireless Outdoor Routing Protocol (WORP®) to prevent snooping
  • Radio mutual authentication eliminates unauthorized use of the system by rogue subscriber units and man-in-the-middle attacks
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Proxim Tsunami MP-10100-CPA-50-US INTRODUCTION

Proxim introduces the Tsunami® MP-10100 CPE/CPA, a compact client device with license-controlled throughput based on the very high capacity, high power, extremely reliable, and cost-effective Tsunami 10100 series. The Tsunami® MP-10100 CPE/CPA supports the following features specifically for last-mile access, video surveillance, or mobility applications requiring high-speed broadband wireless access.

As an Authorized Distributor of ROBUSTEL, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy Proxim Tsunami MP-10100-CPA-50-US Point-to-MultiPoint Radio online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.

You can also find the Tsunami MP-10100-CPA-50-WD and Tsunami MP-10100-CPA-150-US models in the Proxim Tsunami MP-10100 CPE-CPA Series.

Proxim Tsunami MP-10100-CPA-50-US CERTIFICATIONS

  

Point-to-Multipoint Radio : Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in & Data
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Point-to-Multipoint Radio : Antenna
Antenna Type Two N-type Connectors with built-in Surge Protection
Point-to-Multipoint Radio : Radio Specifications
TX Power Up to 28 dBm (dual chain)
MIMO 2x2:2
Modulation OFDM with BPSK, QPSK, QAM16, QAM64, QAM256
Frequency 4.900 – 5.925 GHz (Subject to Country Regulations)
Channel Size 80 MHz, 40 MHz and 20 MHz (±5ppm channel accuracy)
Data Rate MCS 0 to 9 with Dynamic Data Rate Selection
Throughput License controlled to 50, 100, 150 or 200 Mbps
TX Power Control 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support
Point-to-Multipoint Radio : Management
Remote Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Point-to-Multipoint Radio : Standards and Protocols
Synchronization Pass-through IEEE 1588v2 Ethernet Synchronization
Point-to-Multipoint Radio : Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Point-to-Multipoint Radio : Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Point-to-Multipoint Radio : Power Requirements
Power Input 36 to 57 VDC via Ethernet port(Power over Ethernet), 12 VDC via Access port, Power should not be provided simultaneously on both ports
Power Output 12 VDC on Access port
Power Consumption 17 Watt typical, 22 Watt max
Point-to-Multipoint Radio : Physical Characteristics
Safety UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22)
Temperature OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 11.81x10.83x5.31 in (300x275x135 mm)
Dimensions Unpackaged 5.02x8.68x2.85 in (127.5x220.5x72.5 mm)
Weight (PACKAGED) 6.39 lbs (2.9 kg)
Weight (UNPACKAGED) 2.75 lbs (1.250 kg)
Standards and Certifications USA: FCC 90Y + 15E (UNII 15.247), Canada: IC RSS 102 + RSS 111 + RSS 247, Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502, Railway: EN 50155 + EN 50121 + EN 61373
Point-to-Multipoint Radio : Package Checklist
Package Contents One Tsunami® MP-10150-CPE-xxx with integrated dual polarized antenna Or One Tsunami® MP-10100-CPA-xxx with two N-type surge protected connectors, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit (MP-10150-CPE-xxx) Or One Pole mounting kit (MP-10100-CPA-xxx), One Grounding kit, One Quick Installation Guide
Point-to-Multipoint Radio : General
MTBF 250 000 hours