Menu
Your Cart
0

Proxim Tsunami MP-826-CPE-50 Point-to-multiPoint Radio

Proxim Tsunami MP-826-CPE-50 Point-to-multiPoint Radio
Tags: Point-to-Multipoint Radios
Proxim Tsunami MP-826-CPE-50 Point-to-multiPoint Radio
  • Model: Tsunami MP-826-CPE-50
Proxim Proxim
Based on 0 reviews. - Write a review
$0.00
Ex Tax: $0.00
Add to Cart
Buy Now Enquire Now
Add to Wish List Compare this Product
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Introduction

The Tsunami® Multipoint 826 CPE is an ideal solution for large-scale wireless deployments and provides an excellent value proposition to WISPs planning wireless broadband last-mile access deployments. Specifically designed to operate in the 6.4 GHz band, this product is designed to be fully compatible with the MP8620 series products.

The MP-826-CPE enables transparent roaming up to 295 km/h (185 mph) for use in mobile applications such as the provision of Internet access or video surveillance on trains, trams, and busses.


Certifications

  


Features

  • One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in
  • Integrated 15 dBi dual Polarized (H+V) panel antenna
  • 2x2 MIMO
  • Up to 50 Mbps

Point-to-Multipoint Radio : Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100Mbps Ethernet with PoE in
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Point-to-Multipoint Radio : Antenna
Antenna Type Integrated 15 dBi dual Polarized (H+V) panel antenna
Point-to-Multipoint Radio : Radio Specifications
TX Power Up to 25 dBm (dual chain)
MIMO 2x2 MIMO
Modulation OFDM with BPSK, QPSK, QAM16, QAM64
Frequency 5.900 – 6.425 GHz (Subject to Country Regulations)
Channel Size 40 MHz, 20 MHz, 10 MHz, 5 MHz channel bandwidths
Data Rate MCS 0 to 15 for High Throughput mode (6.5 – 300 Mbps) with Dynamic Data Rate Selection
Throughput Up to 50 Mbps
TX Power Control 0 – 20 dB, in 0.5 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Automatic Transmit Power Control (ATPC) with EIRP limit support
Point-to-Multipoint Radio : Management
Remote Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Point-to-Multipoint Radio : Security
Encryption AES-CCM 128 bits
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Point-to-Multipoint Radio : Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Point-to-Multipoint Radio : Power requirements
Power Consumption 6 Watt typical (15 Watt max)
Point-to-Multipoint Radio : Physical characteristics
Safety UL 60950-1/22
Temperature OPERATING -40º to 55ºC (-40º to 131º Fahrenheit), STORAGE -55º to 70ºC (-67º to 158º Fahrenheit)
Humidity Max 100% relative humidity (non-condensing)
IP Rating IP67
Dimensions Packaged 13.97 x 8.86 x 3.46 in (355 x 225 x 88 mm)
Dimensions Unpackaged 4.96 x 8.62 x 2.58 in (126 x 219 x 65.5 mm)
Weight (PACKAGED) 4.9 lbs (2.225 Kg)
Weight (UNPACKAGED) 2.1 lbs (0.950 kg)
Wind Loading 180 km/h (112 mph)
Point-to-Multipoint Radio : Package Checklist
Package Contents One Tsunami® MP-826-CPE with integrated antenna, One 20 W power injector and country specific power cord, One basic Pole mounting kitm One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Grounding kit, One Quick Installation Guide
Point-to-Multipoint Radio : General
MTBF 200,000 hours