Proxim Tsunami QB-10150-LNK-WD Point-to-Point Radio
- Model: Tsunami QB-10150-LNK-WD
Proxim Tsunami QB-10150-LNK-WD FEATURES
- 2 x auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
- 2x2:2 MIMO
- 2 x N-type Connectors with built-in Surge Protection
- IP67




Proxim Tsunami QB-10150-LNK-WD INTRODUCTION
The Tsunami Quickbridge® 10100-xxx is a compact bandwidth-controlled version of the Tsunami Quickbridge® 10100 product family and offers all the advanced features and benefits of the 10100 series with a lower cost of entry. The ability to scale the bandwidth from 50 to 200 Mbps as needed allows the network designer to right-size the link to suit the needs of the application.
This highly reliable and compact product is ideal for installation in cities and by major highways, where wireless point-to-point networks provide the best and lowest cost backhaul of video, radar, and traffic control data.
The Tsunami® Quickbridge® 10100 supports the following key features that are critical for carriers, wireless service providers, and Government organizations that need to know they can rely on the network.
As an Authorized Distributor of Proxim, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy Proxim Tsunami QB-10150-LNK-WD Point-to-Point Radio online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.
You can also find the Tsunami QB-10100-LNK-WD and Tsunami QB-10150-LNK-US models in the Proxim Tsunami 10100 Series.
Proxim Tsunami QB-10150-LNK-WD CERTIFICATIONS
Wireless Radio : Interfaces | |
Ethernet | - |
Wired Ethernet | Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) |
Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
Extension | - |
Management | - |
Wireless Radio : Radio Specifications | |
Radio Type | Point-to-Point Wireless Bridge |
MIMO | 2x2:2 |
Modulation | OFDM with BPSK, QPSK, QAM16, QAM64, QAM256 |
Frequency | 4.900 – 5.925 GHz (Subject to Country Regulations) |
Channel Size | 80 MHz, 40 MHz and 20 MHz (±5ppm channel accuracy) |
Data Rate | MCS 0 to 9 with Dynamic Data Rate Selection |
TX Power | Up to 28 dBm (dual chain) |
TX Power Control | 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
Throughput | 80 MHz: Up to 633 Mbps, 40 MHz: Up to 324 Mbps, 20 MHz: Up to 137 Mbps |
Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support |
Wireless Radio : Antenna | |
Antenna Type | Integrated 2x2 MIMO 22dBi Dual Polarized 1 foot Panel Antenna |
Beam Width | - |
Receive Gain | - |
Transmit Gain | - |
Wireless Radio : Network | |
Modes | Bridging (support LACP through external switches), Routing (RIP v2 and IP tunneling) |
IP Stack | IPv4 and IPv6 simultaneously |
Latency | - |
Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Wireless Radio : Management | |
Remote | Telnet and SSH, Web GUI and SSL/TLS, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Bluetooth Low Energy | - |
Multi-Language Support | - |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Wireless Radio : Security | |
Encryption | AES 128 |
Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
802.1X Support | Not Supported |
Wireless Radio : Wireless | |
AP-AP Communications | - |
RF Environment | - |
Other | - |
Wireless Radio : General | |
MTBF | 250 000 hours |
Wireless Radio : Power Requirement | |
Input Power | 36 to 57 VDC via Ethernet port1 (Power over Ethernet), 12 VDC via Access port, Power should not be provided simultaneously on both ports |
Output Power | 48 to 57 VDC, 12 VDC on Access port |
Power Consumption | 17 Watt typical |
Power Standards | - |
Wireless Radio : Physical Characteristics | |
Temperature | OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit) |
Humidity | 100% relative humidity |
IP Rating | IP67 |
Dimensions Packaged | 14.56 x 13.0 x 7.87 in (370 x 331 x 200 mm) |
Dimensions Unpackaged | 12 x 12 x 3.40 in (305 x 305 x 85 mm) |
Weight (PACKAGED) | 10.91 lbs (4.95 kg) |
Weight (UNPACKAGED) | 5.30 lbs (2.4 kg) |
Standards and Certifications | USA: FCC 90Y + 15E (UNII 15.247), Canada: IC RSS 102 + RSS 111 + RSS 247, Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502 |
Safety | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
Wind Loading | 180 km/h (112.5 mph) |
Wireless Radio : Standards and Protocols | |
Synchronization | Pass-through IEEE 1588v2 Ethernet Synchronization |
Wireless Radio : Package Checklist | |
Package Contents | One Tsunami® QB-10100-LNK with two N-type surge protected connectors (Two QB-10100-EPA) Or One Tsunami® QB-10150-LNK with integrated 22 dBi dual polarized antenna (Two QB-10150-EPR) Or One Tsunami® QB-10150-LKL with integrated 28 dBi dual polarized antenna (Two QB-10150-EPL), Two power injector and country specific power cord, Two Connector weatherproofing kit (Includes all recommended weatherproofing material), Two Wall / Pole mounting kit, Two Antenna alignment (RJ11) dongle, Two Grounding kit, Two Quick Installation Guide |