Menu
Your Cart
0

Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio

Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
Tags: Point-to-Point Radios , Point-to-Point , Radios , Quickbridge® 10250 BeamX Series
Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio
  • Model: Tsunami QB-10250-LKX-WD
Proxim Proxim
Based on 0 reviews. - Write a review
$0.00
Ex Tax: $0.00
Add to Cart
Buy Now Enquire Now
Add to Wish List Compare this Product

Proxim Tsunami QB-10250-LKX-WD FEATURES

  • Point-to-point link that delivers up to 866 Mbps data rate and covers distances up to 10 miles (16 km)
  • AES 128 encryption (Upgradeable to AES 256), Radius authentication, and highly secure remote management via SSL/TLS1.2, SSH, and SNMPv3
  • Service flow-based QoS with deep packet inspection (DPI) to ensure critical data arrives with priority
  • Built-in feature-rich network protocols for IPv4 and IPv6 bridging, routing, and gateway functionality
  • 867 Mbps, MIMO 2x2, BeamX antenna, SmartScan radio
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Proxim Tsunami QB-10250-LKX-WD INTRODUCTION

The Quickbridge® 10250 BeamX radios speed the deployment of point-to-point networks by eliminating the complicated and time-consuming antenna alignment process. The intelligent beam steering technology first used in our Multi-point Base station, the Multipoint 10250 BSX, has been adapted to enable easy and cost-effective installation. Now, a rough alignment between endpoints is enough for the unit to take control of the setup, as the Quickbridge® 10250 manages and maintains the fine-tuning for optimum Signal Noise Ratio. In urban LOS conditions, BeamX QB can help find the right reflection angle from a nearby wall or building to facilitate connectivity. The always-on BeamX intelligence ensures that the link remains optimized to take full advantage of the system's high throughput capability. The BeamX solution, combined with the secondary look-ahead scan radio, improves performance even in high RF interference environments.

As an Authorized Distributor of Proxim, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy Proxim Tsunami QB-10250-LKX-WD Point-to-Point Radio online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.

You can also find the Tsunami QB-10250-LKX-US model in the Proxim Quickbridge® 10250 BeamX Series.

Proxim Tsunami QB-10250-LKX-WD CERTIFICATIONS

  

Wireless Radio : Interfaces
Ethernet -
Wired Ethernet Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) WORP® (Wireless Outdoor Router Protocol)
Wireless Protocol WORP® (Wireless Outdoor Router Protocol)
Extension -
Management -
Wireless Radio : Radio Specifications
Radio Type Point-to-Point Quickbridge®
MIMO 2x2:2 and 0x2:2 (scan radio)
Modulation OFDM with BPSK, QPSK, QAM16, QAM64, QAM256
Frequency 4.900 – 5.850 GHz (Subject to Country Regulations)
Channel Size 80 MHz, 40 MHz and 20 MHz
Data Rate MCS 0 to 9 with Dynamic Data Rate Selection
TX Power Up to 28 dBm (dual chain)
TX Power Control 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Throughput 80 MHz: Up to 672 Mbps, 40 MHz: Up to 324 Mbps, 20 MHz: Up to 134 Mbps
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, and Automatic Transmit Power Control (ATPC) with EIRP limit support.
Wireless Radio : Antenna
Antenna Type Integrated 2x2 MIMO Beam Steering antenna: Beam Width 17° spanning over ± 30° sector Receive Gain 16 dBi (11 dBi before 5.150 GHz) Transmit Gain 20 dBi (11 dBi before 5.150 GHz )
Beam Width 17° spanning over ± 30° sector
Receive Gain 16 dBi (11 dBi before 5.150 GHz)
Transmit Gain 20 dBi (11 dBi before 5.150 GHz )
Wireless Radio : Network
Modes Bridging (support LACP through external switches), Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Latency -
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Wireless Radio : Management
Remote Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Bluetooth Low Energy -
Multi-Language Support Web Interface available in English, French, Spanish, and Chinese
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Wireless Radio : Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
802.1X Support Not Supported
Wireless Radio : Wireless
AP-AP Communications -
RF Environment -
Other -
Wireless Radio : General
MTBF over 250 000 hours
Wireless Radio : Power Requirement
Input Power 36 to 57 VDC via Ethernet port 1 (Power over Ethernet), 12 VDC via Access port; Power should not be provided simultaneously on both ports
Output Power 48 to 57 VDC – 25 Watt on Ethernet port 2
Power Consumption 30 Watt typical, 40 Watt maximum
Power Standards -
Wireless Radio : Physical Characteristics
Temperature OPERATING -40º to 60ºC (-40º to 140º Fahrenheit) STORAGE -50º to 70ºC (-58º to 158º Fahrenheit)
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 18.46 x 7.05 x 21.57 in (469 x 179 x 548 mm)
Dimensions Unpackaged 14 x 14 x 3.40 in (371 x 371 x 85 mm)
Weight (PACKAGED) 13.67 lbs (6.2 kg)
Weight (UNPACKAGED) 7.27 lbs (3.3 kg)
Standards and Certifications USA: FCC 90Y + 15E (UNII 15.247) Canada: IC RSS 102 + RSS 111 + RSS 247 Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502 Safety: IEC 62368-1:2016 & 60950-22:2016 UL 62368-1 2nd edition & 60950-22 2nd edition CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17 EN 62368-1:2014 + A11:2017 & 60950-22:2017
Safety IEC 62368-1:2016 & 60950-22:2016, UL 62368-1 2nd edition & 60950-22 2nd edition CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17, EN 62368-1:2014 + A11:2017 & 60950-22:2017
Wind Loading 200 km/h (125 mph)
Wireless Radio : Standards and Protocols
Synchronization Pass-trough SyncE and Precision Time Protocol (IEEE 1588v2) Ethernet Synchronization
Wireless Radio : Package Checklist
Package Contents One Tsunami® QB-10250-LKX with integrated BeamX antenna and scan radio Two power injector and country specific power cord Two Connector weatherproofing kit (Includes all recommended weatherproofing material) Two Wall / Pole mounting kit Two Antenna alignment (RJ11) dongle Two Grounding kit Two Quick Installation Guide
Quickview
Proxim Tsunami QB-10250-LKX-US Point-to-Point Radio Proxim Tsunami QB-10250-LKX-US Point-to-Point Radio
Brand: Proxim
Proxim Tsunami QB-10250-LKX-US Point-to-Point Radio
Proxim Tsunami QB-10250-LKX-US INTRODUCTIONThe Quickbridge® 10250 BeamX radios speed the deployment of point-to-point networks by eliminati..
$0.00
Ex Tax:$0.00
Add to Cart
Add to Wish List Compare this Product