PULS QS10.DNET DeviceNet Power Supply
Introduction
The QS10.DNET power supply is a derivate of the Dimension
QS10 family, which is specially designed to meet the DeviceNet® requirement.
The QS10.DNET exists beside the QS5.DNET, which is the right choice to supply
networks that use NEC Class 2 cables.
The specialties of DeviceNet® power supplies are:
- The nominal and overload currents are sized for the ratings of the DeviceNet® cables.
- Large-load capacitors can be charged in a very short period of time.
- After turning it on, the output voltage increases according to the DeviceNet® timing specification.
- The upper level of the output level is limited to protect the network.
The most outstanding features are high efficiency, compact size, wide-range input voltage, a very low inrush surge, and a DC-ok contact. High immunity to transients and power surges and a low electromagnetic emission make usage in nearly every environment possible. Unique quick-connect spring-clamp terminals allow a safe and fast installation. A large international approval package makes this unit suitable for nearly every situation.
Certifications
Features
- AC 100-240V Wide-range Input
- DeviceNet® Approved
- NEC Class 1 Compliant
- Width only 60mm
- Efficiency up to 93.4%
- Active Power Factor Correction (PFC)
- Negligible low Inrush Current Surge
- Short-term Operation down to 60Vac and up to 300Vac
- Full Power Between -25°C and +60°C
- DC-OK Relay Contact
- Quick-connect Spring-clamp Terminals
