IntroductionThe MLY10.241 is a simple redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 5A output current, and one output, which can carry nominal currents up to 10A. The module is ..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThe UF20 buffer module is a supplementary device for
regulated DC 48V power supplies, which can be used for
various purposes:
- Deliver DC power to bridge failures of the DC
voltage supply system.
- Extend the hold-up time after the loss of the AC power.
- Deliver extra short-term ..
IntroductionThe UF40 buffer module is a supplementary device for
regulated DC 24V power supplies, which can be used for
various purposes:
- Deliver DC power to bridge failures of the DC
voltage supply system.
- Extend the hold-up time after the loss of the AC power.
- Deliver extra short-term ..
IntroductionThe UZK12.071 battery module utilizes one nonspillable maintenance-free VRLA lead-acid battery,
which is assembled in a package with all wiring and
fusing included.
The battery module is available in two different
options. It can be ordered as a UZK-module with a battery
or as a UZO..
IntroductionThe PWR Power Module Series hot-swappable power modules are designed for the PT-G7828 Layer 3 and PT-G7728 Layer 2 IEC 61850-3 Ethernet switches. The power modules allow the switches to use 24/48 VDC or 110/220 VAC/VDC.Certifications FeaturesInput power 110/220 VDC/VAC,&n..
IntroductionThe PWR Power Module Series hot-swappable power modules are designed for the PT-G7828 Layer 3 and PT-G7728 Layer 2 IEC 61850-3 Ethernet switches. The power modules allow the switches to use 24/48 VDC or 110/220 VAC/VDC.Certifications FeaturesInput power 24/48 VDC for the ..
IntroductionThe MLY02.100 is a simple redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 5A output current, and one output, which can carry nominal currents up to 10A. The module is ..
IntroductionThe PIRD20.241 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A. The module is suitab..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..
IntroductionThis protection module fulfills two basic functions. First, it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input volt..