Menu
Your Cart

MOXA IMC-21GA-T Ethernet to Fiber Converter

Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction

The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames, allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.

Certifications

    


Features


  • 1 x 10/100/1000Mbps T(x) port and 1 x 100/1000Mbps F(x) SFP port
  • 12 to 48 VDC input power
  • Metal body
  • -40 to 75°C operating temperature
Ethernet to Fiber : Interface
10/100Mb RJ45 (Megabit) Ports No
10/100/1000Mb RJ45 (Gigabit) Ports Yes : 1 Port
100Mb Fiber optic multi mode (Megabit) Ports No
100Mb Fiber optic single mode (Megabit) Ports No
1000Mb Fiber optic single mode (Gigabit) Ports No
1000Mb SFP Fiber optic (Gigabit) Ports Yes : 1 Port
M12 port No
Alert Output No
Ethernet to Fiber : Standards and protocols
Protocols and work standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3az (Energy Efficient Ethernet)
Ethernet to Fiber : General
Maximum cable length for data transfer -
MTBF 2,762,058 hour
Ethernet to Fiber : Power Requirements
Power consumed 12V DC, 0.28A to 48V DC
Type of power input Terminal
POE Support No
Protection against reverse voltage Yes
Protection against overflow Yes
Ethernet to Fiber : LED Indicators
LNK/ACT No
Power Yes
Ethernet to Fiber : Buttons
DIP Switch Fiber speed 100M/1000M, Link Fault Pass-through, Energy Efficient Ethernet
Ethernet to Fiber : Physical Characteristics
Standards and Certifications Safety: UL 60950-1, EMC: EN 55032/24, EMI: CISPR 32; FCC Part 15B Class A, EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 1 V/m, EN 61000-4-4 (EFT): Power: 1 kV; Signal: 1 kV, EN 61000-4-5 (Surge): Power: 1 kV; Signal: 1 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF), EN 61000-4-11 , Green Product: RoHS; CRoHS; WEEE, Shock: IEC 60068-2-27, Freefall: IEC 60068-2-32, Vibration: IEC 60068-2-6, IP30 protection
Housing Metal
Dimensions 30x125x79mm
Weight 0.17Kg
Operating Temperature -40 to 75 ° C
Storage Temperature -40 to 75 ° C
Operation Humidity 5% to %95 non-condensing
Installation Din-rail and wall mount