Menu
Your Cart

Proxim Edge Multipoint MP-1055-BS3-WD Point-to-multiPoint Radio

Proxim Edge Multipoint MP-1055-BS3-WD Point-to-multiPoint Radio
  • Model: Edge Multipoint MP-1055-BS3-WD
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0

Introduction

Proxim’s Edge 1055 is a versatile small wireless broadband solution that provides reliable communication in noisy environments.

Offering the same multi-use versatility as the Edge 1025, the Edge 1055 provides the added flexibility of operation in the 4.9 GHz and 5 GHz bands. It also supports 5, 10, 20, and 40 MHz channel sizes where spectrum is limited.


One Device, Multiple Uses

Whether you need a Point-to-Point endpoint, Multipoint CPE, or MultiPoint Base Station, the Edge 1055 does it all.

 

Powered by WORP®

Proxim WORP enables the most efficient wireless broadband access possible in a packet-based network.

Advanced QoS controls, committed interface rates, latency controls, IGMP snooping, and native multicast support allow granular service level management and the best video performance available in this product class.

 

Flexible Antenna Options

Includes an integrated 15 dBi 35-degree dual-polarity antenna and offers external connectors for extended range.

 

Secure

AES 128 encryption with Radius-based authentication and secure management through SSL/ TLS1.2, SSH, and SNMPv3.

 

Rugged Reliability

IP67-rated metal enclosure to ensure years of reliable service in harsh environments, including high winds, high salt, and temperature extremes.


Certifications



Features

  • Wide Band 4.9 and 5 GHz Radio
  • 2x2 MIMO radio delivering up to 294 Mbps
  • Advanced QoS for quad-play applications
  • AES 128 encryption and Radius authentication
  • 5, 10, 20, and 40 MHz channels

Point-to-Multipoint Radio : Interfaces
Wired Ethernet One auto MDI-X RJ45 10/100/1000Mbps Ethernet with PoE in
Wireless Protocol WORP®
Point-to-Multipoint Radio : Antenna
Antenna Type Integrated 2x2 MIMO 15 dBi (12 dBi below 5 GHz) Dual Polarized 35 degree Panel Antenna plus two RP-SMA Connectors (Software switch between integrated antenna and connectors)
Point-to-Multipoint Radio : Radio Specifications
TX Power Up to 24 dBm (dual chain)
MIMO 2x2
Modulation OFDM BPSK-QAM256
Frequency 4.900 – 5.925 GHz (Subject to Country Regulations)
Channel Size 5, 10, 20 and 40 MHz
Data Rate -
Throughput 5 MHz : 25 Mbps, 10 MHz : 50 Mbps, 20 MHz : 122 Mbps, 40 MHz : 294 Mbps
TX Power Control 0 - 21 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
Other Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature
Point-to-Multipoint Radio : Management
Remote Telnet and SSH, Web GUI and SSL/TLS1.2, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
Other Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Point-to-Multipoint Radio : Standards and Protocols
Synchronization -
Point-to-Multipoint Radio : Security
Encryption AES 128
Authentication Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
Point-to-Multipoint Radio : Network
Modes Bridging, Routing (RIP v2 and IP tunneling)
IP Stack IPv4 and IPv6 simultaneously
Gateway Features DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
Point-to-Multipoint Radio : Power requirements
Power Consumption 10 W typical, 12 W max in MIMO 2x2 mode
Power Supply -
Point-to-Multipoint Radio : Physical characteristics
Safety IEC 62368-1:2014 & 60950-22:2016, CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17, EN 62368-1:2014 + A11:2017 & 60950-22:2017
Temperature -30° to 55° Celsius (-22° to 131° Fahrenheit) Temporary increases up to 60ºC (140º Fahrenheit) will not impact operation of the unit.
Humidity 100% relative humidity
IP Rating IP67
Dimensions Packaged 310 x 226 x 98 mm (12.2 x 8.9 x 3.85 in)
Dimensions Unpackaged 170 x 217 x 56 mm (6.7 x 8.55 x 2.2 in)
Weight (PACKAGED) 2.15 kg (4.74 lbs)
Weight (UNPACKAGED) 1.19 kg (2.62 lbs)
Standards and Certifications IEC 62368-1:2014 & 60950-22:2016, CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17, EN 62368-1:2014 + A11:2017 & 60950-22:2017, FCC part 15B class B (EMC), part 15E (5.2 and 5.8 GHz radio) and part 90Y (4.9 GHz radio), EN 301 489-1 + EN 301 489-17
Wind Loading 180 km/h (112.5 mph)
Point-to-Multipoint Radio : Package Checklist
Package Contents One Edge MP-1055-BS3 with integrated antenna plus two RP-SMA connectors, Two SMA weather proofing caps, One M25 weather proofing cable gland, One wall mounted power injector with US to EU plug adapter, One pair of hose clamps, One Grounding kit, One Quick Installation Guide
Point-to-Multipoint Radio : General
MTBF >250 000 hours