Proxim Tsunami XP-10100-SUA-US Point-to-multiPoint Wi-Fi Access Point
Proxim Tsunami XP-10100-SUA-US Point-to-multiPoint Wi-Fi Access Point
- Model: Tsunami XP-10100-SUA-US
$0.00
Ex Tax: $0.00
Over 40 Years in Business
Successful track record across Canada
Full Engineering Services
A powerhouse to provide consultation, training, and support
Strong Brand Portfolio
Top-notch products from superb global and local suppliers
Advanced Technologies
From legacy and mainstream to advanced Industry 4.0
Introduction
Proxim’s Tsunami® XP-10100 is a single endpoint solution delivering high-performance outdoor WiFi. By combining a near-line-of-sight Point-to-Multipoint Subscriber Unit (SU) with an ORiNOCO® Access Point into a single unit, outdoor hotspots can enable rapid and reliable deployment. The Tsunami® XP-10100 is designed explicitly for the Wireless Internet Service Provider but is equally suited to delivering campus-wide connectivity.
Certifications
Features
- Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data)
- Radio # 1: Two N-type Connectors with built-in Surge Protection, Radio # 2: Two N-type Connectors with built-in Surge Protection
- Radio # 1: Up to 672 Mbps @ 80 MHz, Radio #2 : Up to 150 Mbps
- IP67
Point-to-Multipoint Radio : Interfaces | |
Wired Ethernet | Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data) |
Wireless Protocol | - Radio #1: WORP® (Wireless Outdoor Router Protocol), - Radio #2: Wi-Fi (802.11b/g/n) |
Point-to-Multipoint Radio : Antenna | |
Antenna Type | Radio #1 : Two N-type Connectors with built-in Surge Protection, Radio #2 : Two N-type Connectors with built-in Surge Protection |
Point-to-Multipoint Radio : Radio Specifications | |
Frequency | Radio #1 : 4.900 – 5.925 GHz (Subject to Country Regulations), Radio #2 : 2.400 – 2.484 (Subject to Country Regulations) |
Throughput | Radio #1 : Up to 672 Mbps @ 80 MHz, Radio #2 : Up to 150 Mbps |
Other | Radio #1 : Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature , Automatic Transmit Power Control (ATPC) with EIRP limit support, Radio #2 : Automatic Channel Selection (ACS) |
Point-to-Multipoint Radio : Management | |
Remote | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3 |
SNMP | SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB |
Other | Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer |
Point-to-Multipoint Radio : Standards and Protocols | |
Synchronization | Pass-through IEEE 1588v2 Ethernet Synchronization |
Point-to-Multipoint Radio : Security | |
Encryption | Radio #1 : AES 128, Radio #2 : 802.11i/WPA2 and WPA Wireless Security with AES-128, TKIP or WEP |
Authentication | Radio #1 : Internal MAC Address Control List, Radius based Authentication, Radio #2 : Enterprise/802.1x, Personal/ PSK (Pre Shared Key) or Open |
Point-to-Multipoint Radio : Network | |
Modes | Radio #1 : Bridging, Routing (RIP v2 and IP tunneling), Radio #2 : Access Point |
IP Stack | IPv4 and IPv6 simultaneously |
Gateway Features | DHCP Server & relay, NAT with Std ALGs |
VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
Point-to-Multipoint Radio : Power requirements | |
Input Power | 36 to 57 VDC via Ethernet port1 (PoE), 12 VDC via Access port, Power should not be provided simultaneously on both ports |
Output Power | 48 to 57 VDC – 25 Watt max on Ethernet port2 (PoE – software controlled), 12 VDC on Access port |
Power Consumption | 23 Watt typical |
Point-to-Multipoint Radio : Physical characteristics | |
Safety | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
Temperature | OPERATING -40º to 60ºC (-40º to 140º Fahrenheit), STORAGE -50º to 70ºC (-58º to 158º Fahrenheit) |
Humidity | 100% relative humidity |
IP Rating | IP67 |
Dimensions Packaged | 14.56 x 13.0 x 7.87 in (370 x 331 x 200 mm) |
Dimensions Unpackaged | 9.84 x 8.66 x 2.83 in (250 x 220 x 72 mm) |
Weight (PACKAGED) | 10.91 lbs (4.95 kg) |
Weight (UNPACKAGED) | 5.07 lbs (2.3 kg) |
Standards and Certifications | USA: FCC 90Y + 15C + 15E (UNII 15.247), Canada: IC RSS 102 + RSS 111 + RSS 247, Europe: RED EN 301 489-1 + EN 301-489-17 + EN 300 328 + EN 301 893 + EN 302 502, Railway: EN 50155 + EN 50121 + EN 61373 |
Wind Loading | 200 km/h (125 mph) |
Point-to-Multipoint Radio : Package Checklist | |
Package Contents | One Tsunami® XP-10100-SUA unit with four N-type surge protected connectors Or One Tsunami® XP-10150-BS1/SUR unit with integrated 22 dBi panel antenna plus two N-type surge protected connectors, One power injector and country specific power cord, One Connector weatherproofing kit (Includes all recommended weatherproofing material), One Wall / Pole mounting kit, One Grounding kit, Two 2.4 GHz, 5 dBi omni antennas, One Antenna alignment (RJ11) dongle, One Quick Installation Guide |
Point-to-Multipoint Radio : General | |
MTBF | 250 000 hours |